5 SAFETY MAIN MODULE WIRING
Terminal
Arrangement
1
5.2 Input Wiring
Wiring between the emergency stop pushbutton (ES21-SB10G1) and the safety main module
1
The following shows the wiring between the emergency stop pushbutton and the safety main module.
2
3
Wiring between the safety light curtain (receiver) and the safety main module
2
The safety light curtain (receiver) is connected to the safety main module by wiring an external connection cable
to the safety main module.
For the wiring of the products manufactured by SICK AG, refer to the following.
deTec4 Safety light curtain OPERATING INSTRUCTIONS
24 VDC
4
0 VDC
5
Power supply wiring of the safety light curtain (sender)
24 VDC
6
White (reserved)
Black (reserved)
Gray (not used)
0 VDC
24
Safety Contactor
Input Wiring
Wiring
24 VDC
Backside of the
emergency stop
pushbutton
Brown
Blue
White
Black
Gray
(not used)
External connection
cable
(YF2A15-020UB5XLEAX2)
Brown
Blue
External connection
cable
(YF2A15-020UB5XLEAX2)
Power Supply
Wiring
+
System plug for
receiver
(2093097)
+
System plug for sender
(2076832)
+
Receiver
(C4P-EA03011D00)
+
Sender
(C4P-SA03011C00)