Honda EU7000is Owner's Manual page 68

OPERATION
3. Start the engine on each generator and make sure each OUTPUT indicator
(green) comes ON.
4. Turn the AC circuit protector of the parallel operation box ON.
AC CIRCUIT PROTECTORS
RECEPTACLE
5. Plug in the appliance following the instructions provided with the parallel kit.
6. Turn on the appliance.
If the generators are overloaded (see page 69), or if there is a short circuit in a
connected appliance, the OVERLOAD ALARM indicators (red) will come ON. The
OVERLOAD ALARM indicators (red) will stay ON and after about five seconds,
current to the connected appliance(s) will shut off, and the OUTPUT indicators
(green) will go OFF. Stop both engines and investigate the problem.
Determine if the cause is a short circuit in a connected appliance or an overload.
Correct the problem and restart the generators.
66