The SRGROUND and SRGROUND25 grounding bar are comprised of a thin strip of copper that attaches to standard EIA-310-D rack enclosures or open frame racks to provide convenient ground contact for standard rack-mount equipment. The SRGROUND fits into 42U or 48U racks or enclosures.
Rack Enclosures For a 42U enclosure, such as Tripp Lite’s SR42UB, attach the SRGROUND to the 3 indexed horizontal beams at the top, middle and bottom of the enclosure. The included M4 Self-Tapping Screws will go through the three clearance holes (non-threaded) on the bar, and then into the beams of the rack enclosure.
Page 4
2-Post and 4-Post Open Frame Racks Attach the bar to the outside frame of the rack by simply inserting SRGROUND – Attach the 3 Mounting Buttons to the bar the Mounting Buttons into the mounting button holes and in the following holes: snapping them down into place.
Page 5
WARRANTY REGISTRATION Visit tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Introducción La Barra de Conexión a Tierra SRGROUND y SRGROUND25 está compuesta por una barra delgada de cobre que se acopla a gabinetes o Racks de marco abierto estándar EIA-310-D para proporcionar un conveniente contacto a tierra para equipo estándar para instalación en rack. El SRGROUND se adapta a racks o gabinetes de 42U o 48U.
M4 incluidos pasarán por los tres orificios de paso (no roscados) en la barra y después dentro de las vigas del gabinete. Para un gabinete de 48U, como el SR48UB de Tripp Lite, fije el SRGROUND solamente a las vigas horizontales superior y media, ya que la barra no llegará...
Page 9
Instalación Racks de Bastidor Abierto de 2 Postes y 4 Postes SRGROUND – Fije los 3 botones de instalación a la barra Fije la barra al bastidor externo del rack insertando simplemente en los siguientes orificios: los botones de instalación en los orificios para botón de instalación y encajándolos a presión en su sitio.
Page 10
La zapata puede acomodar cables 2/0-14 AWG. Nota: Las instrucciones anteriores son específicas para instalación en racks de bastidor abierto de Tripp Lite. La instalación en otras marcas de racks es posible, pero variará dependiendo de la aplicación. Se proporcionan varios orificios a lo largo de la barra de conexión a tierra que permitirán una instalación operable en un...
EIA-310-D ou aux bâtis à cadre ouvert pour fournir un contact de mise à la terre pratique à l'équipement pour montage en bâti standard. Le SRGROUND entre dans les bâtis ou les boîtiers 42U ou 48U. Le SRGROUND25 entre dans les bâtis ou les boîtiers 24U ou 25U standard.
Page 13
Installation Boîtiers pour bâti Pour un boîtier 42U, comme le SR42UB de Tripp Lite, fixer le 42 U SRGROUND aux 3 montants horizontaux indexés au-dessus, au milieu et dans le bas du boîtier. Les vis autotaraudeuses M4 incluses passeront dans les trois trous de passage (non filetés) sur la barre, puis dans les montants du boîtier pour bâti.
Page 14
Installation Bâtis à cadre ouvert à 2 et 4 montants SRGROUND – fixer les 3 boutons de montage à la barre Fixer la barre au cadre extérieur du bâti en insérant simplement dans les trous suivants : les boutons de montage dans les trous pour bouton de montage, puis en les enclenchant en place.
Page 15
Remarque : Les instructions ci-dessus sont spécifiques au montage dans des bâtis à cadre ouvert Tripp Lite. Le montage dans un bâti d'une autre marque est possible, mais variera en fonction de l'application. Plusieurs trous sont fournis le long de la barre de mise à...
Page 16
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support 20-01-184 93-2935_RevB...