STARTING ADD-IN OR APPLICATION ON SCHEDULE
[MATWorX Ver.8 or later required]
The following procedure explains how to start the specific Add-In or application automatically on sched-
ule by setting the time with the Scheduler.
Scheduler is useful for:
• AP Program Download
• LEN Listup
• Fault Display
• Mach Script Editor
• Save/Load/Verify
For hardware connection of MAT and PBX and for MATWorX software installation, refer to the MAT-
WorX Installation Guide.
STEP1: After starting up the MATWorX, select PBX
figuration Wizard dialog to make the connection to the PBX.
STEP2: Select Application
The Scheduler dialog is displayed.
Click
.
Scheduler from the taskbar.
– 248 –
CHAPTER 3 MAINTENANCE OPERATION
STARTING ADD-IN OR APPLICATION ON SCHEDULE
Connect from the taskbar. And follow Con-
Click
this button
NWA-008847-001 Rev.3.0
a6ch3001.fm