Print Server Rename; Copy/Sync Button Screen - ZyXEL Communications NAS Series User Manual

Table 80 Applications > Print Server (continued)
LABEL
Name
Actions

17.9.1 Print Server Rename

Click Applications > Print Server and a printer's Rename icon to open the following screen. Use
this screen to change the name the NAS uses for the printer.
Figure 132 Applications > Print Server > Rename
The following table describes the labels in this screen.
Table 81 Applications > Print Server > Rename
LABEL
Name
Apply
Cancel

17.10 Copy/Sync Button Screen

The Copy/Sync button on the front panel allows you to copy or synchronize files between a
connected USB or SD device and the NAS.
Click Applications > Copy/Sync Button to open the following screen.
Chapter 17 Applications
DESCRIPTION
This identifies the printer. Each printer connected to the NAS must use a unique name.
Rename: Click this to change the name the NAS uses for the printer.
Cancel Job: Click this to remove all print jobs from the NAS queue for a particular printer.
However, since the NAS sends print jobs to the printer as soon as it can, this button may only
have an effect if there are very large or many print jobs in the queue. To stop a print job that
has already started, you may have to turn off the printer.
Delete: Click this to remove a printer from the NAS's printer list. To add the printer back into
the list, disconnect the printer from the NAS's USB port and reconnect it. If that does not work,
disconnect the USB port and turn off the printer's power. Then reconnect the printer and turn it
back on.
DESCRIPTION
Type a new name to identify the printer. The name must be unique from all the other names of
printers connected to the NAS.
Click this to save your changes.
Click this to return to the previous screen without saving.
Cloud Storage User's Guide
232