Note: Marquees are intended for events and other arrangements and are as such only meant for short term temporary assembly and the following disassembly. Dancover warranty applies only to the normal use of the Product, normal wear and tear excepted, in accordance with written use instructions or manual.
PRODUCT SIZE PARTS LIST Make sure a good installation location NO. Qty. AP1010 2200mm 292cm 292cm 2760mm 2439mm 228cm 207cm NO. Qty. NO. Qty. 238cm 238cm...
Page 4
PERGOLA Instruction manual size:290x290x228 cm PA117020 IMPORTANT You must read these instructions carefully before you start to assemble this PERGOLA .Please ensure that you find all parts in the carton box in the correct type and quantity as mentioned in the list illustrated in every page accordingly. Please carry out the steps in the order set out in these instructions.
SAFETY ADVICE OTHER CAUTIONS We strongly recommend the use of work gloves during assembly. Do not attempt to assemble the PERGOLA in windy or wet conditions, 1. 2 people required, one is for measuring & taking marks to Do not touch overhead power cables with the aluminum profiles. ensure the installation dimension ,the second person is Always wear shoes and safety goggles when working with extruded aluminum.
Page 6
PRODUCT SIZE PARTS LIST Make sure a good installation location NO. Qty. 2200mm 290cm 290cm 2760mm 2439mm 228cm 207cm NO. Qty. NO. Qty. 238cm 238cm...
Page 13
Maintenance: In a timely manner the centralizer skeleton. 1.If the ground not level off, loose soil layer thickness is differ, PERGOLA may tilt to one end, once found, should be timely the centralizer, in case of deformation. The shed may be slant when facing the un-level ground or loose soil layer, please righting the shed urgently to avoid deformation 2.Prevent increased loading-weight artificially.