Chapter7 Memory Card And Battery; List Of Usable Memory Cards - Mitsubishi Melsec-Q Series User Manual

CHAPTER7 MEMORY CARD AND BATTERY

This chapter describes the specifications of the memory cards and the batteries for the Q Series CPU Module and how
to handle them.
7.1 Memory Card
The memory card
tracing function.Note1
It is also used when handling a file register that exceeds the number of points storable in the standard RAM.
( Section 4.1)

7.1.1 List of usable memory cards

Three types of memory cards(SRAM card, Flash card, and ATA card) are available. The memory cards usable for each
CPU module are shown in Table7.1.
*1
Memory card
Q2MEM-1MBS
Q2MEM-2MBS
SRAM card
Q3MEM-4MBS
Q3MEM-8MBS
Q2MEM-2MBF
Flash card
Q2MEM-4MBF
Q2MEM-8MBA
ATA card Q2MEM-16MBA
Q2MEM-32MBA
*1: Only one memory card can be installed for each CPU module.
Storable data vary depending on the type of memory card.
For the data that can be stored on memory cards, refer to the following.
Manuals for the CPU module used (Function Explanation, Program Fundamentals)
Note1
Note7.1 Basic
The Basic model QCPU, Q00U(J)CPU, Q01UCPU do not support memory cards.
is used for storing programs and file registers as well as storing debugged data by the
Note7.1
Table7.1 Memory cards and applicable CPU modules
Q02CPU
Q00JCPU Q02HCPU
Q00CPU Q06HCPU
Q01CPU Q12HCPU
Q25HCPU
Universal
CHAPTER7 MEMORY CARD AND BATTERY
CPU module
Q02PHCPU
Q06PHCPU Q12PRHCPU
Q12PHCPU Q25PRHCPU
Q25PHCPU
Q02UCPU
Q03UD(E)CPU
Q04UD(E)HCPU
Q00UJCPU
Q06UD(E)HCPU
Q00UCPU
Q10UD(E)HCPU
Q01UCPU
Q13UD(E)HCPU
Q20UD(E)HCPU
Q26UD(E)HCPU
: Usable : Not usable
7 - 1
1
2
3
4
5
6
7
8