Page 1: Table Of Contents
How to become a registered owner ........2 Safety instructions ..........3 Warranty.........4 Y2K compliance ....5 The declarations of CE marking ..5 Features and benefits of miniVigor128 ......5 Application of miniVigor128 ....6 Minimum system requirement ......6 Technical specifications ......7 Lamps of miniVigor128...
Page 2 Index For Windows Users Check list before you start....8 Install drivers of miniVigor128....9 Windows 95 Users ....9 1.Installing USB&CAPI 2.0 driver ......12 2.Installing NDISWAN driver ..15 3.Internet access by using Dial-up Networking ......17 4.Com Port/Fax solution Windows 98/Me Users 1.Installing USB, CAPI 2.0, NDISWAN & Vitrual ........18...
Page 3 Index For Windows Users ....34 4.Setting for information Kiosk ......34 4-1.Setting for switch ...35 4-2. Setting for Multiple Subscriber Number ......36 4-3.Setting for PPP ........36 5.PnP indicator ........37 6.Uninstallation .........38 7.ISDN Tester...
Page 4 Index For Mac Users Check list before you start....39 Install drivers of miniVigor128..40 Functions of miniVigor128....43 ....43 1.Internet at 64/128Kbps Connection ........43 1-1. Call bumping ....44 1-2. Connection at 128Kbps .....45 2.Innovative Multiple-port feature ....46 3.Setting for Information Kiosk ......46 3-1.Setting for monitor...
Page 5: Revision
Preface This “Quick reference manual for the installation of miniVigor128 USB-based ISDN TA” is designed to assist us- ers in using the DrayTek miniVigor128 USB-based ISDN TA. Information in this document has been carefully checked for accuracy; however, no guarantee is given as to the correct- ness of the contents.
Page 6: How To Become A Registered Owner
How to become a registered owner Web registration is preferred. Please visit the following web site: http://www.draytek.com.tw/registration.htm Alternatively, you can fill in the registration card (in the back cover) and mail it to the address found on the reverse side of the card.
Page 7: Warranty
Warranty We warrant to the original end user (purchaser) that this miniVigor128 USB-based ISDN TA is free from any defects in workmanship or materials for a period of up to two (2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place because it serves as proof of date of purchase.
Page 8: Y2K Compliance
This warranty shall not apply if the miniVigor128 USB-based ISDN TA is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions.
Page 9: The Declarations Of Ce Marking
The miniVigor128 USB-based ISDN TA has been approved for connection to the Public Switched Telecommunication Net- work using interfaces compatible with ITU-TSS recommenda- tion I.430 (Basic Rate ISDN user access). The miniVigor128 USB-based ISDN TA complies with the R&TTE Directive 5/ 99EC.
Page 10: Minimum System Requirement
Minimum system requirement Minimum system requirement For Windows USB ports on the computer Personal computer with a Pentium/90 MHz or higher pro- cessor running Microsoft Windows 95 OSR 2.1/2.5, or Win- dows 98, or Windows Me or Windows 2000 operating sys- Windows 95 needs Dial-Up Networking version 1.2, or later 16 MB of RAM CD-ROM Drive...
Page 11: Lamps Of Minivigor128
Lamps of miniVigor128 Lamps of miniVigor128 Indicator Lighted Blinking ISDN Lamp ISDN is active. 1 time/ per second: 64Kbps(1 B channel) is using. 2 times/ per second: 128Kbps(2 B channels) is using. USB Lamp USB is active. the data traffic is on the bus.
Page 12: Check List Before You Start
Firstly, you need to ask your telecom to install the ISDN line. As most Telecom already installed the NT1 (or NT1 +) at your site, you shall connect the S/T interface miniVigor128 to ISDN network. Internet or Remote You shall subscribe the Internet account from the...
Page 13: Install Drivers Of Minivigor128
1. Installing USB&CAPI 2.0 driver (1)Plug miniVigor128 to your computer via USB. The plug and play function of the operating system will first interrogate the miniVigor128 to determine if its driver has been installed. If not, Windows will prompt you for the driver.
Page 14 (16- digit serial No. at paper bag of driver CD) Please check with your dealer or DrayTek if your license serial number can not be recognized. (5) Installing DrayTek ISDN Tools...
Page 15 CAPI 2.0 Interface on Windows 95 The computer will ask whether you want to install “DrayTek ISDN Tools”. Press “Yes” if you want it. (6)Now, the miniVigor128 provides CAPI2.0 interface and please install NDISWAN driver for Internet surfing. For Windows Users...
Page 16: Installing Ndiswan Driver
Installing NDISWAN driver on Windows95 2. Installing NDISWAN driver Tips of installing the NDISWAN driver You need to install MSDUN1.3 before you install the NDISWAN driver. MSDUN1.3 is available at the Driver CD. Steps are as below: (1)Open Control Panel->Network (2)Select Add->Adapter->Add For Windows Users...
Page 17 Installing NDISWAN driver on Windows95 (3)At the following window, click on the “Have disk” button. In the window ”install from Disk”: enter the path to the directory containing the NDISWAN driver files. ( path “Windows 95/NDISWAN” on the CD ) Confirm this with “OK”.
Page 18 "Yes" to keep the newer one. (8)After installing NDISWAN driver, you can use it to access Internet. You will have 2 NDISWAN devices known as “DrayTek NDISWAN-Line01” and “DrayTek NDISWAN-Line02” . For Windows Users...
Page 19: Internet Access By Using Dial-Up Networking
Internet via Dial-up Networking on Windows 95 3. Internet Access by using Dial-up Networking (1)My Computer -> Dial-Up Networking -> Make New Con- nection (2) Input the Telephone number of ISP (3) After making a new connection, move the mouse to this connection icon and click the right button.
Page 20 Internet via Dial-up Networking on Windows 95 (4) TCP/IP setting For Windows Users...
Page 21: Com Port/Fax Solution
Internet via Dial-up Networking on Windows 95 (5)Then you can double click the new connection icon to dial to ISP. 4, Com Port/Fax solution If you need COM ports or X.75 modem, V.120 modem, fax..., we recommend you to adopt ISDN or communication software which supports Virtual Com Port interface.
Page 22: Windows 98/Me Users
Installing USB, CAPI 2.0, NDISWAN & Virtual Com Port Drivers on Windows 98/Me Windows 98/Me Users The purpose of installed drivers are as follows: USB device driver is for miniVigor128 be run at Windows 98 /Me. CAPI 2.0 driver is for the interface of communications application.
Page 23 (2)Insert the driver CD into your computer CD-ROM drive. Please select the driver path “Win98_Me” on the driver CD, it will auto detect the model and prepare drivers. As you see the default dialogue of “DrayTek mini ISDN TA for Win98/Me(COM5/6)”, please click “Next”. For Windows Users...
Page 24 Installing USB, CAPI 2.0, NDISWAN & Virtual Com Port Drivers on Windows 98/Me If you want to install as COM3/4, please select “One of the other drivers” and click “View List” to select “DrayTek mini ISDN TA for Win98/Me (COM3/4)”. (3) ISDN Configuration After installing USB driver, it will install NDISWAN driver automatically.
Page 25 After restarting the computer, Windows will present the dialog box which you shall enter the license serial number (16-digit serial No. at paper bag of driver CD) Please check with your dealer or DrayTek if your license serial number can not be recognized. For Windows Users...
Page 26 Making a new connection in the Dial-up Networking on Windows 98/Me (6) Making a new connection in the Dial-Up Networking folder After creating following dialog, you can find the “ISDN TA” icon at the “Network and Dial-up Networking folder”. You can easily click on the “ISDN TA” for setting up the Internet access!! For Windows Users...
Page 27 Regarding the detailed functions of ISDN Tester, Kiosk, PnP Indicator, Unistall mini USB TA, please read details from the “Functions of miniVigor128”. The computer will ask whether you want to install “DrayTek ISDN Tools”. Press “Yes” if you want it. For Windows Users...
Page 28: Windows 2000 Users
(1) Plug miniVigor128 to your computer via USB. The plug and play function of the operating system will first interrogate the miniVigor128 to determine if its driver has been installed. If not, Windows will prompt you for the driver. For Windows Users...
Page 29 After the USB driver is installed, Windows will present the dialog box which you shall enter the license serial number (16-digit serial No. at paper bag of driver CD) Please check with your dealer or DrayTek if your license serial number can not be recognized. For Windows Users...
Page 30 Installing USB, CAPI 2.0, NDISWAN & Virtual Modem Drivers on Windows 2000 (4)Installing NDISWAN &Vitrual Modem drivers (5)Making a new connection in the Dial-Up Networking folder After creating following dialog, you can find the “ISDN TA” icon at the “Network and Dial-up Connections”. You can easily click on the “ISDN TA”...
Page 31 Regarding the detailed functions of ISDN Tester, Kiosk, PnP Indicator, Unistall mini USB TA, please read details from the “Functions of miniVigor128”. The computer will ask whether you want to install “DrayTek ISDN Tools”. Press “Yes” if you want it. For Windows Users...
Page 32: Functions Of Minivigor128
Remember to terminate the ISDN call before unplugging the miniVigor128 in order to assure the Telecom not to keep charging. 2. 64Kbps/128Kbps Connection When you subscribe ISDN from Telecom, you may use the miniVigor128 for stable &...
Page 33: 2-2.Connection At 128Kbps
Also if you want to make a remote analog call and the line connection is at 128Kbps, miniVigor128 will drop to 64Kbps (one B channel) to make this call out. Once 128Kbps is dropped to 64Kbps (i.e. one B channel is dropped), you may manually set up the connection back to 128Kbps by yourself.
Page 34 Connect 128Kbps/using VCOMM A.Connect 128Kbps using VCOMM for Windows 98/Me/2000) Modem Type Function Remark DrayTek ISDN PPP Connect at Right-click on the PnP indicator 64Kbps first to add to 128Kbps or drop back to 64Kbps DrayTek ISDN Connect at Right-click on the PnP indicator...
Page 35 Connect 128Kbps/using NDISWAN B.Connect 128Kbps using NDISWAN If you select NDISWAN (DrayTek NDISWAN-Line0X ) as your device then can bind the other device for multilink (128Kbps). To establish a 128Kbps (multi-link PPP) connection, please proceed as follows: Right-click on the “ISDN TA” icon and select the “Properties”.
Page 36 Connect 128Kbps/using NDISWAN In “Device Name” of “Mutlilink”, select the unused NDISWAN device, e.g. “DrayTek NDISWAN-Line 02”. In the field “Phone Number” enter the same number as already used for the connection setup. For Windows 2000 On “General” dialogue: Check both “ ISDN channel-DrayTek NDISWAN” .
Page 37: Virtual Com Port/Modem
64K or resume to 128K connection anytime you want. 3. Virtual Com Port/Modem The Virtual Com Port/Modem function of USB ISDN TA is developed by DrayTek for the users to utilize non- CAPI-based communications applications if needed. The Virtual Com Port/Modem is available for Windows 98/Me/2000.
Page 38 Kiosk screens. 4-1. Setting for switch Swith type miniVigor128 supports “normal Switch”, “DDI point to point switch” and “DDI point to multipoint switch”. You can use the default setting, “normal Switch” as your switch type. If your local switch provider has already...
Page 39 Setting MSN on Information Kiosk u-law for USA and Taiwan. For other area, please make sure what analog coding method is being adopted by your local Telecom. Otherwise, there will have problems for Fax, V.23 and V.22 bis connection. 4-2. Setting for MSN (Multiple Subscriber Number) Outgoing phone number If you set the outgoing phone number, they will be sent to network when you place a call.
Page 40 In other words, the isdnVigor128 will accept all incoming calls with every port. 4-3. Setting for PPP Dynamic MLPPP The setting is only working if you select “DrayTek ISDN DynamicMLPPP” as modem type. 5. PnP Indicator (1) It can automatically display connection speed.
Page 41 PnP Indicator/Uninstallation one green light and one red light => 64Kpbs (2)Move mouse over the PnP indicator to show the current driver version. (3)Double-click the PnP Indicator to open the Kiosk (4)Add/Drop the 2nd B channel via right- click on the PnP Indicator.
Page 42 ISDN Tester 7. ISDN Tester You can use the “ISDN Line Loopback Test” to assure the device is workable by using your own telephone number. You can also use the “ISDN ISP Test” to assure the ISP phone number is available or not. For Windows Users...
Page 43: Check List Before You Start
Firstly, you need to ask your telecom to install the ISDN line. As most Telecom already installed the NT1 (or NT1 +) at your site, you shall connect the S/T interface miniVigor128 to ISDN network. Internet or Remote You shall subscribe the Internet account from the...
Page 44: Install Drivers Of Minivigor128
Install drivers of miniVigor128 Install drivers of miniVigor128 Before installing miniVigor128, please check whether your Mac system need the upgrade or not.. You can refer to HTML document from miniVigor128 driver CD. Kindly remember to timely get the latest update information for your Mac from visiting www.apple.com...
Page 45 (1)Select the matched language of driver and click it for installation. For example, if you are using French version of OS, you need to use French version of miniVigor128 Mac driver. If you can not find the language the same as your Mac OS, you can select English version.
Page 46 It also device driver if necessary. provides comprehensive on-line information for each call. (4) Plug miniVigor128 to your Mac via USB. After that, the USB lamp of miniVigor128 should light. It means your miniVigor128 is working now. For Mac Users...
Page 47: Functions Of Minivigor128
If there is an incoming analog call and the line connection is at 128Kbps, miniVigor128 will drop to 64Kbps (one B channel) to accept this analog call. Also if you want to make a re- mote analog call and the line connection is at 128Kbps, miniVigor128 will drop to 64Kbps (one B channel) to make this call out.
Page 48: Connection At 128Kbps
Connection at the speed of 64/128 Kbps 1-2.Connection at 128Kbps (Two B channels) Modem Type Function Method Mini USB TA PPP Connect with Done by Apple 64Kbps only. Mini USB TA Connect with You may use “ 2nd B On” DrayPPP 64Kbps first to change the speed...
Page 49: Innovative Multiple-Port Feature
Multiple-port feature How can you use “2nd B Off” or “2nd B On” on the Kiosk? (1)Please click the “2nd B Off” to change to “2nd B On” for from 128Kbps to 64Kbps. (2)Please click the “2nd B On” to change to “2nd B Off” for from 64Kbps to 128Kbps.
Page 50: Setting For Information Kiosk
Setting for Information Kiosk The multiple-port function of USB ISDN TA is developed by DrayTek for the users to utilize up to four (4) communications applications by increasing efficiency. For example, this benefit enables you may still use the FaxStf software to receive/send fax while you are using “Remote Ac-...
Page 51: 3-2.Setting For Multiple Subscriber Number
MSN. For example, if you set an MSN as “123”, the miniVigor128 will only accept the call with “Called Party Number” as xx..x123. Where xx..x denotes any leading digits of the MSN “123”.
Page 52: 3-3.Setting For Isdn
Setting for ISDN 3-3. Setting for ISDN Switch Type miniVigor128 supports “Normal Switch”, “DDI point to point switch” and “DDI point to multipoint switch”. You can use the default setting, “Normal Switch”, as your switch type. If your local switch provider has already informed you that your switch type is DDI ( Direct Dial In), you shall select the DDI switch type for using miniVigor128.
Page 53: 3-4.Setting For Ppp
Setting for PPP 3-4. Setting for PPP Require encrypted password for DrayPPP/ DrayMLPPP(CHAP) If this item is checked, it will enable “CHAP” function for DrayPPP, DrayMLPPP and DynamicMLPPP protocol. Default is enabled for most of ISP PPP servers. It means if you need password encryption or not when you use DrayPPP/MLPPP/ DynamicMLPPP.
Page 54: Uninstallation
Uninstallation Tips of setting Kiosk Press “Save” to save the current Kiosk settings to the memory in order to become effective. At any time, you could press “Restore” to load settings in the memory to the Kiosk display or “Reset” to load default setting.
Page 55: Setting For Applications
Setting for Appications--ARA Setting for Applications 1. Configuration of Your Internet Connection Apple Remote Access (1) Modem Settings ( Control Panels -> modem ) a.Select Window of ”Connect via” : mini USB TA Port 1 ( or 2,3,4 ) b.Select Window of “Modem” : miniUSB TA PPP ( or DrayPPP, DrayMLPPP) (2) TCP/IP Settings ( Control Panels->TCP/IP ) a.Select Window of “Connect via”: PPP...
Page 56 Setting for Appications--AOL (3)Remote Access Settings a.Fill fields of “Name”, “Password” and “Number” for ISP re- spectively b.Press “Connect” (1)Start your AOL by double-click and select “automatic setup” (2)Choose the modem “custom modem” from the list (last entry) (3)The new window “custom modem” opens automatically (4) Enter the following details and click at “Next”...
Page 57 Setting for Appications--CompuSeerve (5)Choose the port where the ISDN TA is connected to: mini USB TA Port n Protocol Initial string For X.75 connection AT&F+ibp=1 For V.120 connection AT&F+ibp=3 For different version of AOL, there are different setting way. Please contact your local AOL people for details. CompuServe Please check which protocol is used by your CompuServe.
Page 58: Configuration Of Faxstf
Configuration of FaxSTF 2. Configuration of FaxSTF Follow the steps as below to set up FaxStf for using Vigor 128 to send/receive fax: (1) Double click “Fax Browser” icon. (2)Click “Edit” -> ”Settings...” -> ”Fax Modem” -> ”Modem...” -> “Driver Type” -> ”Class 1 for 9600 send/ receive Modems”...
Page 59: Other Applications
Configuration of FaxSTF (5) Click “Fax Software”->”Activate”->”Done”. 3. Other applications For other applications setting, please refer to the full HTML-manual on CD. For Mac Users...

Draytek miniVigor128 Quick Reference Manual

Check List before You Start

Install Drivers of Minivigor128

1 Installing USB&CAPI 2.0 Driver

2 Installing NDISWAN Driver

3 Internet Access by Using Dial-Up Networking

4 Com Port/Fax Solution

Functions of Minivigor128

Quick Links

Summary of Contents for Draytek miniVigor128

Table of Contents