Check The Engine; Check The Gfci; Ac Appliance And Power Cord - Honda EB2200i Owner's Manual

To prevent a possible fire, keep the generator at least 3 feet (1 meter) away from
building walls, vehicles, and other equipment during operation. Do not place
flammable objects close to the engine or exhaust.
Before beginning your pre-operation checks, be sure the generator is on a level
and firm surface and the engine switch is in the OFF position.

Check the Engine

• Before each use, look around and underneath the engine for signs of oil or
gasoline leaks.
• Check the engine oil level (see page 32). A low engine oil level will cause the
Oil Alert system to shut down the engine.
• Check the air filters (see page 33). Dirty air filters will restrict air flow to the fuel
system, reducing engine and generator performance.
• Check the fuel level (see page 14). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.

Check the GFCI

Check the GFCI operation (see page 41) after starting the engine.

AC Appliance and Power Cord

Before connecting an AC appliance or power cord to the generator:
• Use grounded 3-prong extension cords, tools, and appliances, or double-
insulated tools and appliances.
• Inspect cords and plugs, and replace if damaged.
• Do not use cord lengths greater than 164 feet (50 meters), and do not use
multiple tools and appliances with built-in noise filters. Such use may activate
the GFCI and interrupt power supply.
• Make sure that the appliance is in good working order. Faulty appliances or
power cords can create a potential for electric shock.
• Make sure the electrical rating of the tool or appliance does not exceed the
rated power of the generator or the receptacle being used.
• Do not exceed the current limit specified for any one receptacle.
BEFORE OPERATION
31