Avoid Hitting Blade With Bucket
When rolling in the arm in a travel or transportation position,
be careful not to hit the blade with the bucket.
Avoid Colliding Blade Against Rocks
Do not attempt to allow the blade to collide with rocks.
Premature damage to the blade and the blade cylinders may
result.
Avoid Colliding Boom Cylinder With Track
When digging deeply with the front attachment positioned
at an angle, as illustrated, the boom cylinder may accidentally
collide with the track, causing damage. Take extra care to
prevent this from happening.
Precautions for Installing Wide Bucket or Special
Type Bucket
If the boom is fully offset to the left and raised on the cab-
equipped machine with a bucket wider than shown to the
right installed, the bucket will come in contact with the cab. Be
sure to install a specially arranged bucket only after consulting
your authorized dealer to prevent the cab collision with the
bucket.
OPERATING THE MACHINE
5-15
ZX26U-5A:
550 mm (22 in)
MZX5-13-015
MZX5-13-016
MZX5-13-018