Advertisement
ITEM # ABARL47 / ABARL53 INSTALLATION INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS BEFORE ASSEMBLY
1
Insert key to unlock and remove
End Cap
4
NOTE: Removable rubber
grip protects surface
Attach the support brace on the opposite mount
6
Note: the distance is measured between the outer
edge of each support brace
DO NOT EXCEED
165 LB MAX LOAD
(INCLUDES ALL ACCESSORIES)
BOTTOM STRIP
2
Remove Channel Strip Insert
from bottom of rack
SUPPORT BRACES
3
Attach the support brace to the
existing mount at front of vehicle
5
Measure distance between support braces
7
Cut Channel Strip Insert to that length.
(Channel Strip helps reduce wind noise)
SUPPORT BRACE
VEHICLE
MOUNT
Advertisement
