Buffalo FB862 Instruction Manual page 14

8. End of Cook Cycle Mode
1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook
Mode, the oven shall go into The End of Cook Cycle Mode.
2) During this mode, "End" displays.
3) If either User Option OP:11 or "OP:12" is selected, the oven will continue to sound until the
user acknowledges this by either opening and closing the door or pressing the "
If User Option OP:10 is selected, after 3 seconds beeping, the oven will enter Ready Mode.
9. Preset Program Cook Mode
1) This mode allows cooking of food items through a one pad touch operation.
While in Ready Mode, pressing one of ten digit keys on the keyboard will cause
the oven to run the Preset Program associated with that key.
2) LED displays the remaining cooking time. If it is multi-stage cooking, the total remaining
cooking time displays not a particular stage cooking time.
3) If the program chosen exceeds the maximum time allowed by User Option 7, then the
oven will beep three times rapidly and display 00:00 to indicate that the program
is unacceptable.
4) When cooking program finishes, the oven will enter End of Cook Cycle Mode.
If you press "
10. On the Fly Cooking
1) The use may start another cook cycle while the oven is cooking or paused.
2) While the oven is cooking or under Pause Mode, if User Option OP:51 is selected
press number buttons, the preset cooking program will start automatically.
3) LED displays the remaining cooking time.
4) When cooking program finishes, the oven will enter End of Cook Cycle Mode.
If you press "
" button under this mode, the oven will enter Pause Mode.
" button under this mode, the oven will enter Pause Mode.
14
" pad.