AEG EC 4835 Instruction Manual page 37

After successful pairing, the PAIR control lamp lights up blue.
For the further procedure, please refer to the user manual of
the playback unit. If possible, adjust the volume of the exter-
nal unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect
the devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. However,
the sound is not played back by the device. After you
have ended the call, the devices are connected to each
other again and playback continues.
Playing Music via USB
This device has been developed in line with the latest
technical advances in the USB fi eld. The wide range of
different USB storage devices of all types which are currently
on the market, unfortunately do not allow us to guarantee full
compatibility with all USB storage devices. For this reason, in
rare cases there may be problems in playing back fi les from
USB storage devices. This is not a malfunction of the device.
Only use commercially available USB sticks.
1. Press the FUNCTION button repeatedly until "USB" is
shown on the display.
2. Connect a USB storage device directly into the port. After
that, " − − − " appears in the display. Playback will auto-
matically start after a few seconds.
For operation, please refer to the section "Description of the
control buttons".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
EC4835_IM
NOTE:
• Please note: The USB port is only intended for playing
music from USB sticks. It only provides a low power
(100 mA) power supply. This USB port is not suitable for
using external 2.5" hard drives with start-up currents
of up to 1100 mA. In order to play music from your
smartphone, iPod or iPhone, connect the designated
AUX IN socket.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.
Description of the Control Buttons
NOTE:
Depending on your playback unit, not all functions might
be supported.
/ SCAN (8)
You can pause and continue music playback. Press again to
continue playback.
(23)
Press once = This jumps back to the previous track.
Press twice = This plays the song before etc.
When you hold down the button in USB mode, a music
search is started.
(22)
Press to skip to the next song and the following songs.
When you hold down the button in USB mode, a music
search is started.
P-MODE / MEM. (16) (only during USB operation)
Press once = " " appears in the display. The
current song will be played repeatedly.
Press twice = " FOLDER " appears in the
display. The selected folder will be
played repeatedly.
Press three times = "RAND" appears in the display. All
songs will be played in random order.
Press four times = " " appears in the display. All
songs will be played repeatedly.
Press fi ve times = All functions are deactivated and the
device continues normal playback.
FOLD. / 10 / M. buttons (14 / 15)
(only during USB operation)
• Press one of the buttons to skip 10 songs forward or
backwards respectively, provided there are more than
10 songs available.
English
37
26.04.16