Consumption Values; Programme Selection Mode And User Mode; The Water Softener - Zanussi ZDLN1512 User Manual

CONSUMPTION VALUES

1)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) In accordance with the 1016/2010 regulation
3) In accordance with the 2019/2022 regulation
Information for test institutes
To receive the necessary information for conducting
performance tests (e.g. according to EN60436),
send an email to:
info.test@dishwasher-production.com
In your request please include the product number
code (PNC) found on the rating plate.
SETTINGS
PROGRAMME SELECTION MODE AND USER
MODE
When the appliance is in programme selection
mode it is possible to set a programme and to enter
user mode.
Settings available in the user mode:
• The level of water softener according to the
water hardness.
• Activation or deactivation of the rinse aid empty
notification.
• Activation or deactivation of the acoustic signal
for the end of a programme.
• Activation or deactivation of the AirDry.
As the appliance stores the saved settings,
there is no need to configure it before every
cycle.
How to set the programme selection mode
The appliance is in programme selection mode
when the programme indicator
After activation, the appliance is in programme
selection mode by default. If not, set the
programme selection mode the following way:
Water
(l)
9.9
11.1 - 13.6
9.6 - 11.7
9.2 - 11.2
3.4 - 4.2
For any other questions regarding your dishwasher
please refer to the service book provided with your
appliance.
Press and hold the programme button until the
appliance is in programme selection mode.
How to enter user mode
Make sure the appliance is in programme selection
mode.
To enter the user mode, press and hold the
programme button until the indicator
flashes and the indicators

THE WATER SOFTENER

The water softener removes minerals from the
water supply, which would have a negative effect
on the washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
flashes.
water authority can advise you on the hardness of
the water in your area. It is important to set the right
Energy
(kWh)
2) 3)
1.039 /1.036
1.052 - 1.285
0.886 - 1.083
0.556 - 0.680
0.012 - 0.015
Duration
(min)
227
160
90
30
15
, and are on.
7