Advertisement
Cisco Unified Video Camera Installation
Procedure
Step 1
On the Cisco Unified IP Phone, press Applications
Step 2
Select Accessories.
Step 3
Highlight Cisco Unified Camera.
Step 4
Press Setup.
Step 5
Select View Area.
Step 6
Use the arrows on the Navigation pad to increase or decrease the view area.
Step 7
Press Save.
Adjust Brightness Setting
The Brightness setting affects the video that you transmit to others. However, it does not affect the video that
you receive from other parties. You can adjust the Brightness setting to improve the quality of the video during
streaming.
Note
Because the field of view can affect brightness, adjust the View Area feature for your camera before adjusting
the Brightness setting.
To adjust the Brightness setting, follow these steps:
Procedure
Step 1
On the Cisco Unified IP Phone, press Applications
Step 2
Select Accessories.
Step 3
Highlight Cisco Unified Camera.
Step 4
Press Setup.
Step 5
Select Brightness.
Step 6
Use the arrows on the Navigation pad to increase or decrease brightness.
Step 7
Press Save.
Adjust Auto Transmit Setting
The Auto Transmit setting allows you to control the streaming of videos for both inbound and outbound calls.
When Auto Transmit is on (default setting), the camera streams video automatically during calls. When Auto
Transmit is off, video for each call is automatically muted (however, your phone still receives video). To
resume video transmission in this case, press the Unmute Video softkey
on or off, follow these steps:
Adjust Brightness Setting
.
.
. To turn the Auto Transmit setting
Cisco Unified Video Camera Installation
3
Advertisement
