Equalizer Function; Listening To Music Via Bluetooth Streaming - Makita XRM09 Instruction Manual

time has elapsed, simply press the Power button to
turn the unit off manually.
Loudness
You can get compensation on lower and higher frequency
for your radio by adjusting the loudness function.
1. Press and hold the Menu/Info button to enter the menu
setting.
2. Rotate the Tuning control knob until "LOUD ON" or
"LOUD OFF" appears on the display. Press the Tuning
control knob to enter the setting.
3. Rotate the Tuning control knob to choose ON to turn
on the loudness function, then press the Tuning control
knob to confirm the setting.
4. To turn off the loudness function, select OFF and press
the Tuning control knob to confirm the setting.

Equalizer function

There are 7 kinds of color LED indicators around the
Tuning control knob to indicate different EQ modes.
1. Press the Power button to switch on your radio.
2. Press the EQ control button to enter the EQ setting
menu.
3. Rotate the Tuning control knob to select your required
mode. Then press the Tuning control knob to confirm
the selection.
EQ mode LED indicator
FLAT White
JAZZ Blue
ROCK Red
CLASSIC Brown
POP Pink
NEWS Yellow
MY EQ Green
Set up My EQ profile
1. Press the EQ control button to enter the EQ setting menu.
2. Rotate the Tuning control knob to select "MY EQ".
Then press the Tuning control knob to enter the "BASS"
setting.
3. Rotate the Tuning control knob to select your required
bass level. Press the Tuning control knob to enter the
"MIDDLE" setting.
4. Rotate the Tuning control knob to select your required
middle level. Press the Tuning control knob to enter the
"TREBLE" setting.
5. Rotate the Tuning control knob to select your required
treble level. Press the Tuning control knob to confirm
the setting.
Note:
● When using the equalizer to emphasize the bass and
listening at high volume levels, it may cause sound
cracking and distortion. In this case, adjust the radio
volume appropriately.
LISTENING TO MUSIC VIA
BLUETOOTH STREAMING
You need to pair your Bluetooth device with the radio
before you can auto-link to play/stream Bluetooth music
through the radio. Pairing creates a 'bond' so two devices
can recognize each other.
Note:
● To have the better sound quality, we recommend
setting the volume to more than two-thirds level on your
Bluetooth device and then adjust the volume on the
radio as required.
● The radio can memorize up to 8 sets of paired device,
when the memory exceed this amount, the oldest
pairing history will be over written.
Pairing your Bluetooth device for
the first time
1. Press the Power button to turn on the radio. Press the
Source button to select Bluetooth mode. The display
will appear "BT PAIR" and "PAIR" will flash on the
display.
2. Activate Bluetooth on your device according to the
device's user manual to link to the radio. Locate the
Bluetooth device list and select the device named
'XRM09' (With some mobiles which are equipped with
earlier versions than BT2.1 Bluetooth device, you may
need to input the pass code "0000").
3. Once connected, there will be a confirmation tone
sound. "BLUETOOTH" will remain on the display and
the backlight will be dim-out in10 seconds. You can
simply select and play any music from your source
device. Volume control can be adjusted from your
source device, or directly from the radio.
4. Use the controls on your Bluetooth-enabled device or
on the radio to play/pause and navigate tracks.
Note:
● If 2 Bluetooth devices, pairing for the first time, both
search for the radio, it will show its availability on both
devices. However, if one device links with this unit first,
then the other Bluetooth device won't find it on the list.
● If your Bluetooth device is temporarily disconnected to
the radio, then you need to manually reconnect your
device again to the radio.
● If 'XRM09' shows in your Bluetooth device list but your
device cannot connect with it, please delete the item
from your list and pair the device with the radio again
following the steps described previously.
● Optimum Bluetooth streaming range is roughly 10
meters (30 feet) (line of sight) to the radio but distance
up to 30 meters (100 feet) are possible.
● If Bluetooth connection is lost due to exceeding time of
separation, exceeding the optimum distance, obstacles
or otherwise, reconnecting your device with the radio
may be necessary.
11 ENGLISH