Front Panel Led Indicators - D-Link DGS-1250 Series Hardware Installation Manual

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Hardware Installation Guide
Port Type
SFP+ Ports
(1/10 Gbps)

Front Panel LED Indicators

The LED indicators provide valuable information in a variety of ways like their color, blinking times, and location.
The front panel LED indicators (per device) are described in the following table:
LED
Power
RPS
(PoE Switches Only)
Console
Port Number
Ports 51 to 52
Figure 2-5 DGS-1520-28 Front Panel LED Indicators
Figure 2-6 DGS-1520-28MP Front Panel LED Indicators
Figure 2-7 DGS-1520-52 Front Panel LED Indicators
Figure 2-8 DGS-1520-52MP Front Panel LED Indicators
Color Status
Green On (Solid)
On (Blinking)
Off
Green On (Solid)
Off
Green On (Solid)
Off
Description
This switch is equipped with 2 SFP/SFP+ ports that can
operate at 1 Gbps and 10 Gbps wire-speeds and support a
wide collection of SFP/SFP+ transceivers.
Description
Power on
Performing system self-test
Power off
RPS on
RPS off
Console session is active (user logged in)
Console session is inactive (user logged out)
4