Table of Contents
Advertisement
General Problems
General Problems
The Booklet maker does not start
Is the touchscreen illuminated?
No
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
V
Is the touchscreen in power-save mode (see
Touch the screen to restore the normal brightness.
No
¦
V
Is the mains power ON/OFF switch illuminated?
No
¦
V
Is the Booklet maker turned ON and connected to the mains power supply of the correct type
and voltage?
No
¦
¦
¦
V
Connect the Booklet maker to the mains supply of the correct type and voltage and then turn
the machine ON.
62
Chapter 6 - Error Conditions, Problems and Solutions
Yes
Are error messages displayed on the touchscreen?
No
¦
¦
V
Is there an error message on the printer?
No
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
V
Turn OFF and turn ON the PSQ.
If the problem continues, then call your service engineer.
The Touch Screen on page
Yes
Go back to the start of this fault-finding table.
Yes
Call your service engineer.
Yes
Replace the fuse at the mains input (see
page
101). If the problem continues, then call your service en-
gineer.
Yes
Error Messages on
See
page 76
Yes
Correct the printer error. If the
printer error message is
'Check Third Party Finishing
Device' or 'check custom',
then check for an error mes-
sage on the Booklet maker
touchscreen. If the problem
continues, then call your serv-
ice engineer.
28)?
Change the Fuses on
Advertisement
Table of Contents
