Preparing The Smartclean System For Use - Philips S5391/12 Manual

ENGLISH
1
5000Series_EN_A6_CS6new.indd 43
Cleaning the shaver in the SmartClean
system (S5390/26 only)
Do not tilt the SmartClean system to prevent
leakage.
Note: Hold the SmartClean system while you prepare
it for use.
Note: If you clean the shaver in the SmartClean
system once a week, the SmartClean cartridge will last
approximately three months.

Preparing the SmartClean system for use

1 Put the small plug in the back of the
SmartClean system.
2
2 Put the adapter in the wall socket.
3 Press the button on the side of the SmartClean
system and lift the top part of the SmartClean
system.
4 Pull the seal off the cleaning cartridge.
5 Place the cleaning cartridge in the SmartClean
system.
43
15/05/15 11:0