Table of Contents
Advertisement
qd System using two VTRs
The figure on the next page shows a 1080/59.94i or
1080/50i system using two HDCAM VTRs (HDW-
F500) connected via SDTI and HD SDI interfaces.
Notes
• To edit using 1080/23.98PsF, make reference signal
connections referring to the system connection
example 9.
• To edit 1080/59.94i or 1080/50i and 1080/23.98PsF,
make reference signal connections referring to the
system connection example qa.
• To make the connections shown in the figure below,
an optional HKDV-506A SDTI interface board must
be installed in the HDW-F500.
• The VTR output of the REMOTE 1 connector cannot
be monitored on XPRI. Monitor the output by
connecting the VTR directly to other external device.
• SDTI interface cannot be used with 1080/24PsF.
For more details, contact your Sony service representative.
B-15
Appendix B
Advertisement
Table of Contents
Troubleshooting
