Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Canon imagePRESS Server J200
- Page 1 imagePRESS Server J200 SERVICE MANUAL JANUARY 21, 2009...
- Page 3 Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.
- Page 4 Introduction Symbols Used This documentation uses the following symbols to indicate special information: Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requiring care to avoid combustion (fire). Indicates an item prohibiting disassembly to avoid electric shocks or problems.
- Page 5 Introduction The following rules apply throughout this Service Manual: 1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer- ence to the timing of operation. In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow indicates the direction of the electric signal.
-
Page 7: Table Of Contents
Contents Contents Chapter 1 Installation 1.1 Points to Note About Installation ........................1- 1 1.1.1 Points to Note About Installation ..........................1- 1 1.2 Checking components ..........................1- 1 1.2.1 Checking components ............................. 1- 1 1.3 Installation procedure ..........................1- 2 1.3.1 Points to Note When Turning ON/OFF the power of Host Machine ................ 1- 2 1.3.2 Before Connection.............................. - Page 8 Contents...
-
Page 9: Chapter 1 Installation
Chapter 1 Installation... - Page 11 Contents Contents 1.1 Points to Note About Installation...........................1-1 1.1.1 Points to Note About Installation..............................1-1 1.2 Checking components ..............................1-1 1.2.1 Checking components .................................. 1-1 1.3 Installation procedure..............................1-2 1.3.1 Points to Note When Turning ON/OFF the power of Host Machine ..................1-2 1.3.2 Before Connection ..................................
-
Page 13: Points To Note About Installation
Chapter 1 1.1 Points to Note About Installation 1.1.1 Points to Note About Installation 0020-5844 Do not hold and lift the upper part of the panel of the main unit. The cover may come off because of the weight of the main unit and fall out. 1.2 Checking components 1.2.1 Checking components 0020-5845... -
Page 14: Installation Procedure
Chapter 1 1.3 Installation procedure 1.3.1 Points to Note When Turning ON/OFF the power of Host Machine 0020-5846 CAUTION: Power-On Order for Turning On the Power When Pickup/Delivery Accessories are Connected Be sure to turn on the power in the correct order otherwise it may cause an error because the host machine fails to recognize accessories including this equipment. - Page 15 Chapter 1 F-1-3 2) Connect the Crossover Ethernet Cable [1] with the connector [2] on the back right of the host machine. F-1-4 3) Connect the power plug of the host machine. 4) Connect the power cable with point [1] of the PS unit. MEMO: Use the correct power cable to match the location/area of installation.
-
Page 16: Checking The Operation After Making Settings
Chapter 1 F-1-5 5) Insert the other side of the power cable to the outlet. 6) Turn ON the power switch [1] of the PS unit. F-1-6 7) Turn ON the power of the host machine. 1.4 Checking the Operation After Making Settings 1.4.1 Checking the Operation 0020-5854 Output a test page and setting page in the following procedure to check the connection between the host machine and this equipment and this equipment's setting. -
Page 17: Connecting To The Network
Chapter 1 PS Test Page PCL Test Page Configration Job Log F-1-9 Setting information is transmitted from this equipment to the host machine and RIP and print statuses are displayed so that the actual print status can be checked. 1.4.2 Connecting to the Network 0020-5855 Ask a network administrator to do network connection (Straight Ethernet Cable), setting and test print.