Area Info - Sharp GX-31 User Manual

e00_cover_7.book Page 91 Wednesday, March 10, 2004 6:22 PM
Setting Languages
Allows you to select your preferred language for the
cell broadcast message display.
1.
Perform steps 1 to 3 in "Subscribing to Cell
Broadcasts" on page 90.
Press a or b to highlight "Language", then press
2.
to select.
3. Press .
The language list is displayed.
Press a or b to highlight the language you wish to
4.
set, then press to select.
Press C [Back] to exit.
5.

Area Info

(M 4-7)
The Area Info is the message information that operators
sent to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed on the stand-by screen.
Note
• This function may not be available on all mobile
phone networks. Contact your network operator for
more information.
Enabling/Disabling Area Info
Press A during stand-by.
1.
Press a or b to highlight "Area Info", then press
2.
to select.
Press a or b to highlight "On" or "Off", then
3.
press to select.
Note
• If Area Info is set to "On", the stand-by time will
decrease.
Messages 91