PS/2, ADB, Serial Mouse Control ...24 USB Mouse/Keyboard Control ...24 OSD Menu Function Description ... 25 Main Menu ... 25 Picture 1 Menu ... 26 Picture 2 Menu ... 26 Input Menu ... 27 Screen Menu ... 28 ViewSonic PJ650...
Page 3
Problem Diagnostics ...37 Specifications ...38 Outline Dimension ...38 Customer Support ...39 Limited Warranty ...40 VIEWSONIC Projector ...40 Appendix ...41 Power Cord Safety Guidelines ...41 Compliance Information for U.S.A..42 Compliance Information for Canada ...42 Compliance Information for European Countries ...42 User Information for all Countries ...42...
DPMS and DDC are trademarks of VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
WARNING: Before using this equipment, read this manual thoroughly. Always ensure that the equipment is used safely. Power Cord Video/Audio Cable RGB Video Cable Batteries for Remote Control CD-Wizard USB mouse cable Remote Control ViewSonic PJ650...
TEMP indicator LAMP indicator Lens cap AUDIO IN R and L ports VIDEO IN port USB port COMPONENT VIDEO port ViewSonic PJ650 RESET button MENU button KEYSTONE button Remote sensor S-VIDEO IN port RGB IN 1 and 2 ports CONTROL port...
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor. ViewSonic PJ650 2 Insert the batteries Align and insert the two AA...
CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual “PJ650 Quick START GUIDE” and this manual. • If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction.
Optional PS/2 mouse cable Optional ADB mouse cable Optional serial mouse cable Optional RS-232C cable Optional S-video cable with mini DIN 4- pin jack Accessory audio/video cable Optional component video cable Accessory audio/video cable or optional audio cable with RCA jack ViewSonic PJ650...
2 Insert the batteries into the remote control. 3 Connect the power cord (1) Connect the connector of the electrical power cord to the AC inlet of the main unit. (2) Firmly plug the power cord's into the outlet. ViewSonic PJ650 AC inlet Power cord Power outlet...
NOTE: • Some computers may have multiple display screen modes. The use of some of these modes may not be possible with this projector. • For some RGB input modes, the optional Mac adapter is necessary. ViewSonic PJ650 Desktop computer...
The picture is projected. NOTE: Turn the power on/off in right order. • Power on the projector before the computer or video tape recorder. • Power off the projector after the computer or video tape recorder. power switch Control panel ViewSonic PJ650...
4 Confirm that the POWER indicator has gone off and then attach the lens cap. When the projector has completed powering down, the POWER indicator will go off. NOTE: Except in emergencies, follow the abovementioned procedure for turning power off. ViewSonic PJ650 power switch Control panel...
As illustrated below, each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project. Use the zoom ring to adjust the screen size Use the focus ring to focus the picture ViewSonic PJ650...
Press the VOLUME button to close the dialog box (Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) Press the MUTE button again to restore the sound. ViewSonic PJ650 Press this to increase the volume Press this to decrease the volume...
Press the POSITION button again to close the dialog box and complete this operation. (Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) This function is only available for RGB IN 1/2 input. buttons to adjust the position ViewSonic PJ650...
The signal type best suited for the respective input signal is selected automatically. This feature is available only if VIDEO is set to AUTO in the INPUT menu. NOTE: The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input signals. ViewSonic PJ650...
NOTE: • This function may not be work well with some types of input signals. • The adjustable range for correcting keystone distortions will vary with the type of input signal. ViewSonic PJ650...
If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long. ViewSonic PJ650 buttons to...
The input signal screen is shut off, and a blank screen appears. You can set the blank screen using the menu (from the SCREEN menu, select BLANK). Press the BLANK button again to remove the blank screen, and return to the input signal screen. ViewSonic PJ650...
[ex. Adjusting SHARPNESS] Use the buttons to adjust the SHARPNESS. ViewSonic PJ650 buttons. The current settings of the items that can be manipulated via buttons, then press the buttons, then press the or ENTER button.
BLANK function, or displaying the menu screen. Remote Control Operation button Press ENTER button Press RESET button Remote Control Operation button Press ENTER button Press RESET button Press HOME button Press END button Press PAGE UP button Press PAGE DOWN button Press ESC button ViewSonic PJ650...
MIRROR Select Mirror Status: NORMAL LANGUAGE Select Menu Language: ENGLISH ㈰本語 ViewSonic PJ650 Press the "MENU" button. Choose a menu name using the button or the ENTER button. Choose an item using the button or the ENTER button. Press the button or the ESC button.
H SIZE with the RESET button. OVER SCAN Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO): LARGE It is recommended to select SMALL to avoid flicker at the lower part of the picture. Description Light Light Light Description Left MIDDLE SMALL Soft Down Right Small ViewSonic PJ650...
In the SYNC ON G mode, the picture may be distorted with certain input signals. In such cases, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal. ViewSonic PJ650 Description NTSC NTSC4.43...
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s). TURN OFF: A non-patterned (plain) blue color screen. • The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several minutes after being displayed. Description ORIGINAL ORIGINAL TURN OFF ViewSonic PJ650...
Page 32
MyScreen Lock Invalidation of MyScreen registration function: TURN ON When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed. In this way, one can prohibit rewrites (“writeovers”) of the MyScreen ViewSonic PJ650 FULL TURN OFF buttons.
The message functions will not operate properly if the filter time is not reset correctly. • Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER". Description Short (Min. 1 min.) WHISPER button. CANCEL (DISABLE: 0 min.) The ViewSonic PJ650...
Maintenance Lamp To order a new lamp unit (Lamp Part # RLU-150-001), contact ViewSonic or your dealer. For the lamp part number, see the Optional Parts in the Specifications in this guide. For contact information, see the Customer Support table in this guide. Before replacing the lamp, turn the Power Switch OFF, remove the power cord from the power outlet, then wait at least 45 minutes until the lamp has cooled.
7 Slowly turn the projector so that the top is facing up 8 Turn on the projector power, and using the menu, reset the lamp timer • To reset the lamp timer, from the OPTION menu, select LAMP TIME. ViewSonic PJ650...
2 To clean a reusable filter, carefully vacuum both sides of the filter area. 3 If the filter is damaged and needs to be replaced, contact your dealer or ViewSonic Corp. Replace the old filter then put the grill back in place.
• Make sure to turn off the power and unplug the power cord before caring for the unit. Please care-fully read all the PJ650 Quick START GUIDE in this manual, in order to care for your projector correctly. • Do not use cleaners or chemicals other than those listed above, including benzene and paint thinner.
ON *** SYNC IS OUT OF RANGE ON *** CHECK THE AIR FLOW ViewSonic PJ650 Description The unit does not display a warning message on the screen when the lamp expires or fails. When the lamp does not light, this indi- cates that the lamp is no longer functional and should be replaced.
This is a notification that it is time to clean the filter. After cleaning the fil- ter, operate the FILTER TIME portion of the OPTION Menu, and perform reset of the FILTER TIME. Description ViewSonic PJ650...
When the interior becomes overheated, power to the unit automatically shuts down. Press the main switch on the side of the unit to the off position then wait 20 minutes to allow the unit to cool down before any work is done to the unit. ViewSonic PJ650 Items to be confirmed Turn on the main power.
COMPONENT VIDEO (Y, C /, C ) ...1 Lamp:RLU-150-001 ViewSonic offers other accesories including items such as air filters, remote controls, ceiling mounting brackets, manuals, soft cases, etc. Please contact your dealer or ViewSonic for information. Specification AUDIO Terminal AUDIO IN (R, L) ... 1 OUT Terminal RGB OUT...
Customer Support For technical support or product service, see the table below or contact your reseller. When calling ViewSonic Customer Support please have the product's model name and serial number on hand. Country/Region Web site United States viewsonic.com/support Canada viewsonic.com/support United Kingdom viewsoniceurope.com...
How long the warranty is effective: ViewSonic projectors are warranted for three (3) years for all parts excluding the lamp and three (3) years for all labor from the date of the first consumer purchase. Projector lamps are warranted separately.
HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors. If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product. ViewSonic PJ650 Switzerland ...SEV Britain...BASE/BS Figure 1...
The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/ 31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” User Information for all Countries NOTICE: Use the cables which are included with the projector or specified. ViewSonic PJ650...