Table of Contents
Advertisement
TAS Configuration
This screen works in conjunction with TAS. (TAS software can be purchased through
Tivella at www.tivella.com or through an authorized Tivella dealer/reseller.) Click
Management > TAS. The screen shown below appears.
1
In the Timeout (sec) field, type the number of seconds for the NMP-500s to
access TAS.
2
In the IP Address field is a valid DNS name automatically generated by TAS
when connected to a network but empty when used as a standalone.
3
If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save
Configuration > click Save.
ViewSonic ND4200/ND5000
16
Advertisement
Table of Contents
