ViewSonic VP912s User Manual page 14

Control Explanation
Input Priority
this function can be used to select which computer has priority
Depending on the selected Input Priority, the display will do a one
time detection for available inputs when first powered on.
For example: If the Input Priority setting is D-SUB1=>D-SUB2=>DVI,
then the first priority will be given to D-SUB1 when the display turns
on. If there is no video signal on D-SUB1, then the next priority will be
given to D-SUB-2, etc... In the case of only one signal being present at
the three inputs, then the display will automatically detect and display
that signal.
The Input Priority setting can also be disabled. In this case, the input
will return to the last setting when the display is first turned on. The
user will need to control all the port settings manually under this
condition. Inputs can be switched quickly by pressing the "Up" arrow
button on the front panel controls.
OSD Position
and control screens.
OSD Timeout
screen is displayed. For example, with a "30 second" setting, if a
control is not pushed within 30 seconds, the display screen
disappears.
OSD Background On/Off
background On or Off.
OSD Pivot
when the display is changed from Landscape to Portrait mode.
Memory Recall
if the display is operating in a factory Preset Timing Mode listed
in the Specifications of this manual.
If multiple computers will be connected to the display,
allows you to move the on-screen display menus
sets the length of time the on-screen display
allows you to turn the On-Screen Display
This function is used to rotate the OSD menu,
returns the adjustments back to factory settings
ViewSonic VP912b/VP912s 13