Advertisement
5 YEAR LIMITED WARRANTY
You should read all of the instructions before attempting to use Honeywell LED lighting
and light bulb products.
Sky Rich Star Limited (SRS) warrants Honeywell LED lighting and light bulb products
against defects in material or workmanship for a period of five (5) years from the date of
original purchase. SRS agrees to either repair the product or replace it, at the sole
discretion of SRS. Only the original purchaser of Honeywell LED lighting and light bulb
products are extended this warranty. No warranty work will be provided under this
warranty without purchaser's receipt or other proof of the date of original purchase
acceptable to SRS. Proof of the date of purchase must be provided to SRS if the product
is returned. Purchasing Honeywell LED lighting and light bulb products from a third
party vendor negates all warranties (expressed or implied) in this warranty. The warranty
does not apply to the following terms/conditions:
1.) Acts of God,
2.) Products that have been subjected to unauthorized repair, opened, disassembled,
and/or otherwise modified,
3.) Products used not in accordance with directions,
4.) Damages exceeding the total cost of product,
5.) Plastic or plastic shades,
6.) The finish of any portion of the product (i.e. surface scratches, weathering, corrosion,
discoloration of brass components, as this is considered normal wear and tear).
7.) Damages caused by shipping, improper handling, accident, misuse or abuse. SRS is
not responsible for damage of merchandise in transit. Repaired or replaced products
shall be subject to the terms of this warranty and are inspected prior to return shipment.
Damages that are incurred during transit should be reported at once to the carrier and a
claim should be filed with them.
SRS SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY. ALL IMPLIED WARRANTIES, IF ANY, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS
WARRANTY. Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so the
above exclusions or limitations may not apply to you. No other warranty, written or
verbal, will be honored for this product. This warranty grants you specific legal rights,
you may also have other rights which vary from state to state. There are no other
warranties except those stated above.
Thank You
Should you require any assistance for a Honeywell LED lighting or light bulb product
please call our Toll Free Number 1-877-723-0723
8:00 A.M. - 5:00 P.M. Central Time, Monday - Friday
Email us at: customerservice@idctexas.com
You will need the following information:
Model/Item Number of Product, Receipt, and Date of Purchase
All drawings and text are © copyright of Sky Rich Star Limited.
PARTS AND SPECIFICATIONS
A
G
F
H
D
I
A) Work Light, Beam Ligh Power
B) Charging Port
C) Beam Light
D) Lanyard
E) Work Light
EN | 1
B
G
E
F
H
J
F) Bluetooth Speakers
G) Bluetooth Activation
H) Magnets
I) Micro USB Cable
J) USB Power Adapter
8.5"
MOUNTING INSTRUCTIONS
Magnets:
Powerful magnetics attach to any ferrous metal surface
H
OPERATING INSTRUCTIONS
NOTE: Please charge the light before operating. Insert USB into USB Power Adapter,
insert Micro USB Cable into light and insert USB Power Adapter into wall outlet.
HOW TO OPERATE WORK LIGHT AND BEAM LIGHT:
1. Press Work Light Power Button (A) once for High Light Output (600lm), press again
for Medium Light Output (300lm), press again for Low Light Output (100lm) and
press again for strobe function. Press again to turn light off.
2. To activate beam light (C), hold down Work Light power button (A) for 2 seconds and
press again to turn off.
HOW TO OPERATE BLUETOOTH SPEAKER POWER :
1. Press Bluetooth Activation button (G) for 2 seconds to turn on speaker.
2. Bluetooth Speaker will enter pairing mode. Activate bluetooth on your device and
find device named A03HW061C-AL. Press to pair.
3. Press Bluetooth Activation button (G) for 2 seconds to turn off speaker.
4. Press Bluetooth Activation button (G) quickly to pause or play music.
DUAL-COLOR INDICATOR LIGHT INSTRUCTIONS :
1. Light will be red while charging and will turn off upon unit reaching a full charge.
2. When Bluetooth is activated, light will slow flash during pairing mode and solid blue
when paired.
SAFETY INFORMATION
WARNING
1. This product is not a toy and contains small parts. Close supervision is necessary
when this unit is used near children.
2. To reduce the risk of electrical shock, do not put the unit in water or other liquid. For
cleaning, use a soft dry cloth. Do not place or store appliance where it can fall or be
pulled into a tub or sink.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B Digital
Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmfull interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,including interference that may
cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
H
C
A
B
K
G
EN | 2
Advertisement
