Installing And Removing An Sfp And Sfp+ Module; Installing An Sfp And Sfp+ Module - Cisco Catalyst 3650 Series Hardware Installation Manual

Chapter 2 Switch Installation
Figure 2-14
1
2
Note •
•

Installing and Removing an SFP and SFP+ Module

This section explains how to install and remove SFP and SFP+ modules.

Installing an SFP and SFP+ Module

Class 1 laser product. Statement 1008
Warning
OL-29734-01
Connecting the StackWise Cable to the StackWise Adapter
CO NS O
LE
M GM T
1 2
StackWise cable
Cisco logo
When you have to remove the StackWise cable from the connector, make sure that you fully unscrew
the correct screws. When the connectors are not being used, replace the dust covers.
If the StackWise cable is difficult to remove, you can use a flat-blade screwdriver to assist with
removing the cable screws. The screwdriver only works for cable removal and is designed to slip off
if used for cable installation.

Installing and Removing an SFP and SFP+ Module

3
3 StackWise adapter installed in a StackWise port
Catalyst 3650 Switch Hardware Installation Guide
2-17