Feature Menu - JVC LT-32R15BU Instructions Manual

Wide lcd panel tv
Table of Contents

Advertisement

Press " " or " " button to select Balance.
Press " " or " " button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.
Headphone
Press " " or " " button to select Headphone.
Press " " button to view the headphone
menu.
Headphone sub-menu options are described
below:
Volume
Press " " or " " button to select Volume. Press
" " button to increase headphone volume
level. Press " " button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63.
Sound Mode
Press " " or " " button to select Sound Mode.
Using " " or " " button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press " " or " " button to select AVL. Press " "
or " " button to set the AVL as On or Off.
Spdif Out
Press " " or " " button to select Spdif Out.
Press " " or " " button to set the Spdif Out.
as On or Off.
Note: If Spdif Out is set to On, headphone will be
disabled.
Effect
If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
Press " " or " " button to select Effect. Press
" " or " " button to set as On or Off .

Feature Menu

Pip-Pap
In the Feature menu, highlight PIP item by
pressing " " or " " buttons. Press " " button
to enter PIP submenu:
Using " " or " " button, you can switch to PIP,
PAP mode or turn off the feature.
• When PIP Mode is entered, the default active
window is the PIP window and the active
window is indicated by an orange frame
around it. The active window can be changed
by pressing " " or " " button. The status info
OSD belongs to active window. The place of
the status OSDs are same for both windows.
• At PAP Mode, two pictures with equal sizes
are displayed on the screen. Aspect Ratios of
the windows are fi xed.
When you switch to PAP Mode, main window
in
PIP Mode will be displayed on the right side of
English - 21 -

Advertisement

Table of Contents
loading

Table of Contents