D-Link DCS-936L Technical Support Setup Procedure
Hide thumbs
Also See for DCS-936L:
- Quick installation manual (97 pages) ,
- User manual (71 pages) ,
- Quick install manual (8 pages)
Advertisement
Quick Links
Technical Support Setup Procedure
How to setup NTP Server for DCS-936L?
Step 1: Connect the power of the camera and power on.
Step 2: Open Internet Explorer and enter
http://sg.mydlink.com
Step 3: Enter mydlink registered username and password. Click on Sign In.
Step 4: Select DCS-936L. Click on Settings
Page 1 of 4
Advertisement
Related Manuals for D-Link DCS-936L
Summary of Contents for D-Link DCS-936L
- Page 1 Technical Support Setup Procedure How to setup NTP Server for DCS-936L? Step 1: Connect the power of the camera and power on. Step 2: Open Internet Explorer and enter http://sg.mydlink.com Step 3: Enter mydlink registered username and password. Click on Sign In.
- Page 2 Technical Support Setup Procedure Step 5: Click on Advanced Settings. Step 6: Click on Open the Advanced Settings window. Step 7: Copy down the IP address of the DCS-936L show in the URL bar. Page 2 of 4...
- Page 3 Technical Support Setup Procedure Step 8: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar. Step 9: Enter the camera user name and password that had set during setting up of the camera.
- Page 4 Technical Support Setup Procedure Step 11: Under TIME AND DATE a) Check on the box beside Synchronize with NTP Server. b) Select either ntp.dlink.com.tw or ntp1.dlink.com as NTP Server. c) Click on Save Settings. --- END --- Page 4 of 4...