Radio; Change The Crossover Type; Search For A Station; Direct Access Tuning - Kenwood DPX-M3200BT Instruction Manual

Getting Started
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[ENGLISH] Select the display language for [FUNCTION] menu and music information
if applicable.
[TURKCE]
By default, [ENGLISH] is selected.

Change the crossover type

Press B SRC repeatedly to enter STANDBY.
1
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, see page 22.
CAUTION
Select a crossover type according to how the speakers are connected.
(Page 30, 31)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.

Radio

• "ST" indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.

Search for a station

1 Press B SRC repeatedly to select RADIO.
2
Press BAND repeatedly (or press #FM+/
to select FM1/FM2/FM3/AM/SW1/SW2.
3 Press S / T (or press S / T (+) on the remote control) to
search for a station.
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning

(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a station frequency.
Press ENT IW to search for a station.
3
AM– on the remote control)
*
7
ENGLISH