Jigging Camera - Sony DSC-S75 Training Manual

Chapter 17 - DSC-F707 Jigging Camera
A defective SY-072 board should be replaced and not be repaired under warranty. The old board should be
returned for core credit, as per Sony policy.
The board is located on top of the lens assembly inside the lens barrel housing. It is accessible after the lens
housing is removed.
? You can check the SY-072 board and the lens assembly "in circuit" with an extender ribbon cable.
? The camera must be fully aligned after the board is replaced. To reduce the alignment time, whenever
possible use Radar W to upload and save the data from the original SY board to the computer then download
it back into the new board.
43
18. DSC-F707 Camera Switches