GE JX1124STC Installation Instructions

Installation
Instructions
Questions? Call 1.800.561.3344
❒ BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
inspector's use.
IMPORTANT –
•
ordinances.
• Note to Installer –
Be sure to leave these instructions with the
Consumer.
Note to Consumer –
•
reference.
• For easier installation and personal safety, we recommend that
two people install this microwave oven.
WARNING –
grounded 3-hole, 120V receptacle as required by the National
Electrical Code.
FOR YOUR SAFETY:
WARNING –
installation, switch power off at service panel and lock
the service disconnecting means to prevent power
from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the
service panel.
READ CAREFULLY.
KEEP THESE INSTRUCTIONS
or Visit our Website at:
Save these instructions for local
Observe all governing codes and
Keep these instructions for future
This oven must be plugged into a properly
Before beginning the
.
Built-In Trim Kits
JX1124STC
GEAppliances.ca
• Do not alter or modify any part of this kit or the oven.
• Unplug the microwave oven before attempting installation of
this kit.
• Skill level – Installation of this appliance requires basic
mechanical and electrical skills.
• Completion time – Less than 1 hour
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered
under the Warranty.
• This kit is cUL listed for installation alone. Not for use adjacent
to (within 2 feet of) any gas or electric range, cooktop or oven.
• This kit is for use on model: JE1140 STC.
Number
1 Screw, M4 x 10
2 Customer Supplied Cabinet
3 Microwave Oven
4 Lower Exhaust Guide
5 Screw M4 x 8
6 Trim Piece
7 Screw M3 x 20
8 Upper Exhaust Guide
1
PARTS
Part Quantity
4
Not Included
Not Included
1
7
1
4
1