Husqvarna CT 36 Series Operator's Manual page 25

Lifting and Transporting
Continued from the previous page.
4. Lift the machine.
WARNING
To reduce risk of back injury while lifting, keep your feet flat on ground and shoulder
width apart. Keep your head up and back straight.
Mechanically lifting requirements
■ Motor stopped
■ Machine unplugged
■ Lifting equipment (crane, hoist, or fork truck) capable of supporting the
machine's weight
■ Lifting devices (hooks, chains, and shackles) capable of supporting the
machine's weight.
Mechanical lifting
To lift the machine mechanically, perform the procedure below.
1. Attach the optional lifting bracket (b) to the trowel with screws and locknuts.
Torque to 25 Nm (18 ft.lbs.).
2. Attach the lifting devices and equipment to the lifting bracket. Do not attach
lifting devices to any other part of the machine.
3. Lift the machine a small distance.
WARNING
Crushing hazard. An unstable machine may cause the lifting devices and
equipment to fail. You may be crushed if the lifting devices and equipment fail.
► Check for stability before continuing.
4. Check for stability. If necessary, lower the machine, reposition the lifting devices
and lift the machine a small distance again.
5. Continue lifting the machine when it is stable.
WARNING
Personal injury hazard. Do not lift the trowel overhead with a float pan attached, as
the pan could fall off and strike personnel working in the vicinity.
Walk-Behind Trowels
26
wc_tx004126gb_FM10.fm