Table of Contents
Advertisement
To avoid deterioration in audio quality, set the microphone gain in the range so that the gain limit lamps are not lit or
only one lamp is lit.
3.
[Mic gain]
Displays the default value of the microphone gain.
Press the +/– buttons, or press the value and enter a new value directly, to change the setting.
Changes are applied immediately without pressing the [Set] button.
4.
[Capture range]
Selects the capture range.
5.
[Noise reduction]
Selects the noise reduction level.
6.
[Feedback reduction]
Selects the feedback reduction level.
7.
[Noise gate]
Selects the noise gate level.
8.
[Equalizer 60Hz], [Equalizer 250Hz], [Equalizer 1kHz], [Equalizer 4kHz], [Equalizer 12kHz]
Displays the default equalizer value for each frequency.
Press the +/– buttons, or press the value and enter a new value directly, to change the setting.
Changes are applied immediately without pressing the [Set] button.
9.
[Status]
Displays error messages for each MAS-A100 if a problem occurs.
[System] page
This page is used to check/change the system settings of the MAS-A100.
19
Advertisement
Table of Contents
