Bosch ErgoMixx MSM6 IN Series Instruction Manual page 8

en English
Caution!
Before cutting meat, remove gristle, bones
and sinews. The universal cutter is not
suitable for cutting very hard food (coffee
beans, radishes, nutmeg) and frozen food
(fruit, etc.).
X Fig. B
■ Place the universal cutter on a smooth,
clean work surface and press.
■ Insert the blade.
■ Add food.
Warning!
Blade must sit straight in the universal
cutter so that the attachment sits correctly
(Fig. B).
■ Place the attachment on the universal
cutter and rotate in a clockwise direction
until it "clicks" into position.
■ Place the base unit on the attachment
and lock into position.
■ Insert the mains plug.
■ Hold the base unit and universal cutter
firmly and switch on the appliance
(turbo speed).
■ Release the ON button after processing.
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the attachment.
■ Rotate the attachment in an anti-clock-
wise direction and remove from the
universal cutter.
■ Take hold of the blade by the plastic
handle and take out.
■ Place the lid on the universal cutter to
keep in the processed ingredients.
Cleaning
Warning!
Never immerse the attachment of the
universal cutter in liquids and do not clean
under flowing water or in the dishwasher.
Wipe the attachment with a damp cloth only.
Note:
Universal cutter, blade and lid are
dishwashersafe.
8
Whisk
Operation
The whisk is suitable for whipping cream,
beating egg whites and milk froth from hot
(max. 70 °C) and cold milk (max. 8 °C), as
well as for preparing sauces and desserts.
W Risk of scalding!
When processing hot milk, use a tall,
narrow receptacle for blending. Hot milk
may splash and scald you.
X Fig. C
■ Put ingredients into the blender jug.
■ Place the gear attachment on the base
unit and lock into position.
■ Insert the whisk into the gear attach-
ment and lock into position.
Warning!
Never insert the whisk into the base unit
without the gear attachment (Fig. C-3).
■ Insert the mains plug.
■ Set required speed using the speed
control (recommendation: high speed).
■ Grip base unit and blender jug and
press required ON button.
■ Release the ON button after processing.
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the gear attachment.
■ Remove the whisk from the gear
attachment.
Cleaning
Warning!
Never immerse the gear attachment in
liquids and do not clean under flowing water
or in the dishwasher. Wipe the gear attach-
ment with a damp cloth only.
The whisk can be cleaned in the
dishwasher.
Changes reserved.