Advertisement
Quick Links
Motorola DTR600/700/720 series two-way radio
Firmware Update info
6-July-2020
DTR600/700/720 two-way radios firmware to be updated to:
Firmware Version: R01.02.02
Codeplug Version: R01.02.01
Keypad Version: R01.02.00
Affected Tanapa :
SUPER TANAPA
PMUF1952A
PMUF1954A
PMUF1956A
PMUF1958A
PMUF1960A
PMUF1962A
Tanapa
PMUF1953A
PMUF1955A
PMUF1957A
PMUF1959A
PMUF1961A
PMUF1963A
Sales Model
DTS130NBDLAA
DTS150NBDLAA
DTS1504BDLAA
DTS1505BDLAA
DTS1502BDLAA
DTS150PBDLAA
Advertisement
Related Manuals for Motorola DTR600 Series
Summary of Contents for Motorola DTR600 Series
- Page 1 Motorola DTR600/700/720 series two-way radio Firmware Update info 6-July-2020 DTR600/700/720 two-way radios firmware to be updated to: Firmware Version: R01.02.02 Codeplug Version: R01.02.01 Keypad Version: R01.02.00 Affected Tanapa : SUPER TANAPA Tanapa Sales Model PMUF1952A PMUF1953A DTS130NBDLAA PMUF1954A PMUF1955A DTS150NBDLAA...
- Page 2 FW R01.01.02 provides enhancement listed below: 1. Fixed Renoir freeze screen issue. Note: When the issue happens, the radio's screen freezes but the radio is still able to transmit call, receive call and can power down radio via on/off button. 2.
- Page 3 (task tray for Windows computer). This will take a while. 4. Please wait until the driver installation is completed. 5. Download and double click to install the Update Tool application (provided by Motorola Team) into the computer.
- Page 4 8. Click “Next” to install DTR Update Tool in default location in your computer. 9. Click “Next” to select the default program folder.
- Page 5 10. Click “Next” to proceed the install type. 11. Click “Install” to proceed installation.
- Page 6 12. The installation will take a few minutes. 13. Once the installation is finished, check the checkbox to run the Update Tool now. Then click “Finish”. 14. This ends your one time setup steps.
- Page 7 Steps to update radio firmware from R01.00.02 to R01.02.02 (Same before startsteps for R01.01.00 to R01.02.01) 1. Before starting, ensure no other USB devices are plugged into your computer except keyboard and mouse. 2. Execute/Run the Update Tool program with computer connected to radios via cable and docking station, please wait for a while, you should see “USB Cable Connected”...
- Page 8 5. Click “Get Radio Information” button to read the current radio information and show on the screen. 6. Observe a pop up show “Successfully get radio information”.
- Page 9 7. Ensure the radio model is the one you want to upgrade and with correct firmware version which is R01.00.02 in this example. Do not proceed update if the radio is not the correct model/firmware version. 8. Select “Restore radio’s personality” if you need to restore your previous configurations. *** if “Restore radio’s personality”...
- Page 10 9. Click the “update” button to update the radio to the new firmware. ***Do not disconnect and do not power down the radio during the upgrade process. 10. A pop up will remind you on your update information and cautious. Click the “Yes” button.
- Page 11 11. There will be a black pop up screen showing % of progress. Please do not press any button on your keyboard as that will pause the upgrading process. Please wait for the radio to be completely updated. This should take about 15 minutes. Do not worry about what is shown on the radio display at this moment.
- Page 12 15. Once update is completed, below screen will be shown. 16.Check the Radio Information in DTR update Tool and make sure all firmwares version are the same as figure below. 17. Please wait for radio to complete the restart before unplugging the radio from the docking/charging station.
- Page 13 *There will be a chance of failing during the update depending on the computer usage and environment. *Please close all the running applications before starts updating. *If failure persists, please stop upgrade using this computer and try another computer. If failure still persists, please do not perform upgrade and get to Motorola support.