Summary of Contents for Buffalo MiniStation HD-PGF
Page 1
Please make sure to read this manual before using and follow the procedures. If you have any inquiries about the product, contact the number on the warranty statement or the packing box. Do not discard the included documents, the warranty statement, or the packing box. www.buffalo-technology.com 35022030-01 May 2020...
Diagrams Diagrams Power/Info LED The LED glows white when the drive is on, and blinks white slowly when the drive is accessed. If Lock and Go is enabled, the LED blinks white once every two seconds when the drive is locked. When Lock and Go Setup is initializing the drive, the LED blinks white twice per second.
Specifications Specifications Check the Buffalo website for the latest product information and specifications. Interface USB 3.2 (Gen 1)/3.1 (Gen 1)/3.0/2.0 Connector Micro-B 4 TB and more: 79.5 × 21.5 × 119 mm; 3.13 × 0.85 × 4.69 in. Dimensions (W × H × D, excluding 2 TB: 79.5 ×...
Notes Notes • Before using this drive with a Mac, reformat it with Mac OS Extended using Disk Utility of the macOS device. • To avoid damage to data, never do any of the following operations while data is being accessed: ◦...
Dismounting the Drive Dismounting the Drive If your computer is turned on, please follow the procedure below to dismount the drive before unplugging it. If your computer is turned off, then it is always safe to unplug the drive. Unplugging the drive incorrectly can corrupt data. Please be careful.
The drive may not be getting enough power from the power supply. Refer to the “MiniStation Cannot Be Found on Your Computer” item above and try option (4). If it does’t work, contact Buffalo technical support. The Power/Info LED Glows or Blinks Amber Drive failure may soon occur.