Table of Contents
Advertisement
Quick Links
DC-to-AC Inverters
* Applies to models with "UL" in their model numbers.
Reliable AC Power Wherever You Need It!
Congratulations! You've purchased the most advanced, feature-rich
Inverter designed as a mobile energy source for your vehicle.
PowerVerter Inverters efficiently convert DC (battery) power into
120V AC (household) power, allowing you to use equipment you
commonly use at home-appliances, entertainment systems, computers,
power tools and more-while cruising the open road. PowerVerter
Inverters, through a high-efficiency conversion process and a charge
conservation setting, draw the highest level of performance from your
batteries without overtaxing them, lengthening their service life. An
automatic low battery shutdown feature ensures you'll always have
plenty of power for starting purposes.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on
the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number.
The series number should not be confused with the marking name or model number of the product.
Owner's Manual
PowerVerter
Input
12 VDC
2
3
4
5
6
Copyright © 2005. PowerVerter
* Inverters are moisture-resistant, not waterproof.
Plus
®
Output
120V, 60 Hz. AC
• Automatic Overload Protection
• Automatic "Battery-Saver" Low Voltage Shutdown
• High Efficiency DC-to-AC Inversion
• Multi-Function Lights & Switches
• Optional Remote Control Capability
• Frequency-Controlled Output
• Moisture-Resistant Construction*
• Battery Charge Conserver (Load Sense)
Contents
Maintenance/Warranty
®
is a registered trademark of Tripp Lite. All rights reserved.
1111 W. 35th Street, Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
7
8
(back page)
8
(back page)
8
(back page)
Advertisement
Table of Contents
Related Manuals for Tripp Lite Welding System
Summary of Contents for Tripp Lite Welding System
-
Page 1: Table Of Contents
Regulatory Compliance Identification Numbers For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. -
Page 2: Safety
Equipment Connection Warnings • Do not use a Tripp Lite Inverter in life support or healthcare applications where a malfunction or failure of a Tripp Lite Inverter could cause failure of, or significantly alter the performance of, a life support device or medical equipment. -
Page 3: Feature Identification
See page 4 for resetting instructions. Front View (750 & 1250 Models) Remote Control Module Connector: allows remote monitoring and control with an optional module (Tripp Lite model APSRM4, sold separately). See remote module owner’s manu- al for connection instructions. -
Page 4: Operation
Connect Remote Control—OPTIONAL All models feature an 8-conductor telephone style receptacle on the front panel for use with an optional remote control module (Tripp Lite model APSRM4, sold separately.) The remote module allows the Inverter to be mounted in a compartment or cabinet out of sight, while operated conveniently from your vehicle’s dashboard. -
Page 5: Application Guide
You must allow your batteries to recharge long enough to replace the charge lost during Inverter operation or else you will eventually run down your batteries. NOTE: For Tripp Lite Inverters over 1000 watts used in mobile applications, Tripp Lite recommends you use at least two batteries, if possible, fed by a heavy-duty alternator anytime the vehicle is running. -
Page 6: Mounting
Inverter and connected systems. Tripp Lite Inverters are designed for horizontal mounting in a variety of vehicular or non-vehicular applications. User must supply mounting hardware and is responsible for determining if the hardware and mounting surface are suitable to support the weight of the Inverter. Contact Tripp Lite if you require further assistance in mounting your Inverter. -
Page 7: Battery Connection
Battery Connection Connect your Inverter to your batteries using the following procedures—always loosely twist each pair of cables together before connecting them separately to the appropriate DC terminal on the Inverter (positive or negative). • Connect DC Wiring: You must run positive cable(s) through user-sup- plied UL-listed fuse(s) and fuse block(s) of the... -
Page 8: Ac Output Connection
Service If you are returning your Inverter to Tripp Lite, please pack it carefully, using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the Inverter is within the warranty period, enclose a copy of your sales receipt.