Hitachi BD-D80CVE Instruction Manual page 11

Installation
● Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
● Optimum water pressure is 0.05~1.0MPa.
Water Inlet Valve
Drain Hose
●
Do not kink or protract the drain hose.
●
Position drain hose properly, otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
1.Put it into the water trough.
Water
trough
●
If the machine has drain hose support, please install it like the following.
●
When installing drain hose, fix it properly with a rope.
●
If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
Water Supply Hose
WARNING
！
2.Connect it to the branch drain pipe of
the trough.
NOTE
WARNING
！
11
Hose Connector
Trough
Hose Retainer
Max.100cm
Min.60cm
Rubber Seal