Automatic Opposed Blade Dampers
AOBD
IOBD
APPLICATION
The opposed blade dampers are rectangular dampers with a
24-volt, two-position, power open and closed damper motor
used to control the volume of circulating air in heating, cooling,
and ventilating system.
® U.S. Registered Trademark
Copyright © 2001 Honeywell • All Rights Reserved
FEATURES
• Anodized extruded aluminum.
• Three models available:
AOBD-BM
• Fully assembled and ready for installation.
• For odd-size dampers, contact Honeywell Customer
• Order dampers by size and model:
• When ordering AOBD-BM dampers up to 24 in. wide, a
• For odd-size dampers, order a one-inch filler strip for
— AOBD with side-mounted motor.
— AOBD-BM with bottom-mounted motor.
— IOBD with internally-mounted motor.
Service or your local Honeywell Sales Representative
for pricing.
— Order AOBD and IOBD using width by height.
(AOBD motor and end plate are mounted on the
height dimension.)
— Order AOBD-BM using height by width. (AOBD-BM
motor is mounted on the width dimension.)
— AOBD-BM is available only up to 20 in. wide with-
out a filler strip.
filler strip up to 4 in. is built-in.
each odd dimension.
(AOBD)
PRODUCT DATA
68- 0246