Siemens SONOLINE G20 Installation Instructions Manual page 7

SONOLINE G20 System Delivery Procedure
4. Release and remove the three Corro clips, located on the front of the shipping contain-
er.
- To release the clip, squeeze the two vertical bars together and then pull the top of the
bars down and away from the clip.
- To remove the clip, pull the clip away from the cardboard box.
Fig. 1:
Pos. A
Pos. B
5. Unpack the shipping crate.
- Remove the accessory box.
- Remove the cardboard box from the G20 system.
- Remove and retain the screws that secure the two roll-out ramps to the cardboard
base; remove the two ramps.
Fig. 2:
Pos. A
Pos. B
Pos. C
Siemens
Medical Solutions USA, Inc.
Corro Clip Removal
Squeeze together to release lock
Pull away from the shipping container
Shipping Base
Roll-out ramp
Ramp screws
Cardboard Base
US06-101.812.01.02.02
10.04
Page 7 of 26
sd
7
SONOLINE G20