Summary of Contents for D-Link DCS-9500T
- Page 1 Quick Installation Guide Group Temperature Screening Camera Kit DCS-9500T Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
Quick Start Guide Additional optional accessories are also available, please contact your local D-Link reseller for more information. If any of the above items are damaged or missing, please contact your local D-Link reseller. System Requirements • Windows® operating system •... -
Page 4: Interface Connectors
ALARM OUT2 ALARM IN1 ALARM OUT1 Connect to microphone Audio Input Connect to speaker Audio Output DC12 V Power interface, connects to the 12 V DC power adapter Network Interface Connects to a standard RJ45 Ethernet cable DCS-9500T Quick Installation Guide... -
Page 5: Installation
Wall Mount Configuration 2 - 2.3 m If mounting on the wall, the DCS-9500T should be installed anywhere from 2-2.3 m from the ground. The Blackbody should be installed at the same height as the camera, but 3-5 m in front of the camera, inside the field of view (FOV) of the camera. - Page 6 2 - 2.3 m 2 - 2.3 m If mounting from the ceiling, the DCS-9500T should be installed anywhere from 2-2.3 m from the ground. The Blackbody should be installed at the same height as the camera, but 3-5 m from the camera, inside the field of view (FOV) of the camera.
-
Page 7: Web Management Interface (Wmi)
If the latest plugin is not corretly installed, you will not be able to configure parameters, even if you can view video playback. Before installing the plugin, it is recommended to temporarily exit any anti-virus software and close your internet browser. DCS-9500T Quick Installation Guide... -
Page 8: Temperature Management
Using the mouse, drag a square over where the Blackbody is located on the screen, as seen in the above image. Note: Be sure that the green square exactly outlines the Blackbody for the most accurate results. Click Apply to save settings. DCS-9500T Quick Installation Guide... - Page 9 The green box will calibrate itself on the visible camera view based on the Mapping Points on both thermal and visible camera views. Note: The closer the green square is to exactly outlining the Blackbody, the more accurate your results will be. DCS-9500T Quick Installation Guide...
-
Page 10: Face Detection
Set Enable to On to enable temperature detection. Swap between Celcius and Fahrenheight under Temperate Unit. Celsius is set as default. Set the Ambient Temperature to the temperature of the camera’s environment; e.g. indoor temperature of 25 °C. DCS-9500T Quick Installation Guide... -
Page 11: Alarm Configuration
Set the Alarm Temperature which defines what body temperature and above will set off the alarm. Navigate to Alarm > I/O Alarm Linkage. Here you can configure your output channel and settings for the I/O alarm. Be sure to choose an output channel. Set Trigger Mode to Connect. DCS-9500T Quick Installation Guide... - Page 12 Enter a channel name, set Valid Signal to Open, choose an Alarm Output Mode, set the length of the Alarm Time and optionally enable Timing Alarm Output. Test whether or not you correctly configured the alarms by using the Manual control function. DCS-9500T Quick Installation Guide...
-
Page 13: System Installation
Double-click on the installation file. The above installation window will pop up. Click Term of service and read the documentation, then check Agree. Click Setup to start the installation and follow further installation instructions. Client Login Default account and password are both set to admin. DCS-9500T Quick Installation Guide... -
Page 14: Add Device
CMS is a complete management platform with many different features and functions, all accessible from the Main Menu seen above. You can use Card Management to add temperature-related functions to the Common Functions page for convenient access. Add Device DCS-9500T Quick Installation Guide... -
Page 15: Temperature Screening
Drag each channel into the two panels in the middle of screen so that you can view both the thermal and visible video streams at the same time. In the Face Recognition side panal, click in the top right corner. DCS-9500T Quick Installation Guide... -
Page 16: Temperature Configuration
If the temperature drops below or exceeds this interval, an alarm will be issued. The default range is between 36.5 °C to 37.8 °C. After all values have been set, click Apply to save your settings. DCS-9500T Quick Installation Guide... - Page 17 Choose between Ignore to play no sound, Speech to play a corresponding voice prompt and Buzzer for a beeping alarm signal. Click Save in the lower right corner to save your configuration. dlink.com/support TECHNICAL SUPPORT DCS-9500T Quick Installation Guide...
- Page 18 Ver. 1.00(WW)_130x183 2020/03/06 5300-00007657-01W...