USB3.0 to 2.5G Ethernet Adapter DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference. INTRODUCTION This USB3.0 to 2.5Gbps Ethernet Adapter is a high performance and low expenditure solution.
USB3.0 to 2.5G Ethernet Adapter Storage Humidity 5% to 90 % RH (no condensation) Power Consumption 4.75V~5.25V Voltage Standby Power <60mA (When Ethernet cable is not connected) Normal Operating Power <80mA 10Mbps <130mA 100Mbps <300mA 1Gbps <460mA 2.5Gbps Regulatory Approvals Certifications FCC,CE Accessories...
7.0 DRIVER INSTALLATION 1.Please download from Realtek official website: https://www.realtek.com/en/component/zoo/category/network-interface-controllers-10-100-10 00m-gigabit-ethernet-usb-3-0-software Or from CableCreation official website https://www.cablecreation.com/download/?ss=cd0026&stype=download 2, When you installed the drivers, please use your “ Administrator permission (Run as Administrator)to install it. If you were using macOS, please use your “Admin” account to install the drivers.(You...
Page 6
Ethernet icon, the item probably was defective, your PC or Mac’s USB ports probably have some problems, you can swap another PC or other USB ports to have a try. For more questions, email to us support@cablecreation.com...