Table of Contents
Advertisement
Installation
Connecting the telescopic TV/
FM antenna
To improve TV and FM reception, connect the
supplied telescopic TV/FM antenna to the back
of the set.
1
As shown below, insert the shaft of the antenna
into the antenna holder then gently push in until
click sound is heard.
2
Fix the supplied antenna holder on the back
panel.
●
As shown below, locate and align the antenna
holder with 5 mounting holes on the back panel,
then gently push the antenna holder in the holes.
1
3
As shown below, on the bottom of the set, plug
the antenna cord marked TV to the antenna jack
marked TV, and the antenna cord marked FM to
the antenna jack marked FM.
●
Pull out and orient the TV/FM antenna rods to
maximize reception efficiency.
8
●
Position the antenna as far away as possible from
the AC adapter, VCR or other radiation source.
To detach the antenna holder
As shown below, push on A, and simultanesouly
take the antenna holder off the set.
Connecting CATV/additional TV
antenna
The TV antenna jack at the bottom of the set
can be also used to connect CATV cable (not
2
supplied), or an additional TV antenna (such as
an outdoor antenna).
●
Simply plug CATV cable or additional TV
antenna to the TV antenna jack.
Warning:
Never make or change connections with
the power supply switched on.
A
CATV cable
Advertisement
Table of Contents
