Grizzly EASY FEEDER G0826 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Power Supply
  5. EASY FEEDER G0826
  6. Owner's manual
Grizzly EASY FEEDER G0826 Owner's Manual

Grizzly EASY FEEDER G0826 Owner's Manual

Power feeder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL G0826
"EASY FEEDER"
POWER FEEDER
OWNER'S MANUAL
(For models manufactured since 01/17)
COPYRIGHT © AUGUST, 2017 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
V1.08.17
#BL18915 PRINTED IN TAIWAN

Advertisement

Table of Contents
loading

Related Manuals for Grizzly EASY FEEDER G0826

Summary of Contents for Grizzly EASY FEEDER G0826

  • Page 1 (For models manufactured since 01/17) COPYRIGHT © AUGUST, 2017 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. V1.08.17 #BL18915 PRINTED IN TAIWAN...
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Table Of Contents

    Table of Contents INTRODUCTION ..........................2 Contact Info ..........................2 Manual Accuracy ........................2 Identification ..........................3 Controls & Components ......................4 Machine Data Sheet ........................6 SECTION 1: SAFETY ........................8 Safety Instructions for Machinery ....................8 Additional Safety for Power Feeders ..................10 SECTION 2: POWER SUPPLY ......................

  • Page 4: Introduction

    ID label. This will help us help you faster. tions, specifications, drawings, and photographs in this manual. Sometimes we make mistakes, but Grizzly Technical Support our policy of continuous improvement also means 1815 W. Battlefield that sometimes the machine you receive is Springfield, MO 65807 slightly different than shown in the manual.

  • Page 5: Identification

    Identification Become familiar with the names and locations of the controls and features shown below to better understand the instructions in this manual. Horizontal Vertical Travel Travel Lock Handle Upper Vertical Elbow-Joint Column Upper Horizontal Elbow-Joint Travel Lock Handwheel Swivel Lock Base Lower Elbow-Joint...

  • Page 6: Controls & Components

    Controls & A. Motor Start/Speed Dial: Starts and stops motor and controls feed rate from 7–72 FPM. Components To start motor, press dial until it beeps and control panel glows red. To stop motor, press dial again. To adjust feed rate, press SET button, then rotate dial clockwise to increase feed rate or counterclockwise to decrease feed rate.
  • Page 7 Power Feeder & Column Controls Figure 2. Location of column controls. Figure 3. Location of power feeder and column controls. Angle Adjustment Scale: Indicates angle that power feeder assembly is rotated relative Horizontal Travel Handwheel: Moves over- to overarm shaft. Loosen hex bolts on upper arm shaft horizontally and adjusts lateral elbow-joint to allow rotation;...

  • Page 8: Machine Data Sheet

    Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0826 EASY FEEDER POWER FEEDER Product Dimensions: Weight................................117 lbs. Width (side-to-side) x Depth (front-to-back) x Height............37-1/2 x 20-1/2 x 29-1/2 in. Footprint (Length x Width).........................
  • Page 9 Operation Info Number of Feed Speeds........................Variable Feed Speeds............................ 7 – 72 FPM Swing..............................360 deg. Vertical Movement..........................6-11/16 in. Horizontal Movement..........................17 in. Rotation........................... Forward/Reverse Roller Info Number of Rollers............................. 3 Roller Width............................2-5/16 in. Roller Diameter............................4-3/4 in. Roller Suspension.............................

  • Page 10: Section 1: Safety

    SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating This Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages.
  • Page 11 WEARING PROPER APPAREL. Do not wear FORCING MACHINERY. Do not force machine. clothing, apparel or jewelry that can become It will do the job safer and better at the rate for entangled in moving parts. Always tie back or which it was designed. cover long hair.

  • Page 12: Additional Safety For Power Feeders

    Additional Safety for Power Feeders Serious injury or death can occur from getting hands, clothing, or jewelry entangled in moving parts of power feeder or being pulled into cutting tool on attached machinery. Workpieces ejected by attached machine can strike operator or bystanders with significant force, causing impact injuries.

  • Page 13: Section 2: Power Supply

    SECTION 2: POWER SUPPLY Availability Circuit Information Before installing the machine, consider the avail- A power supply circuit includes all electrical ability and proximity of the required power supply equipment between the breaker box or fuse panel circuit. If an existing circuit does not meet the in the building and the machine.
  • Page 14 Grounding Requirements This machine MUST be grounded. In the event of certain malfunctions or breakdowns, grounding Serious injury could occur if you connect reduces the risk of electric shock by providing a machine to power before completing setup process. DO NOT connect to power until path of least resistance for electric current.

  • Page 15: Section 3: Setup

    Grizzly or the shipping agent. You MUST have the original pack- NOTICE aging to file a freight claim. It is also extremely helpful if you need to return your machine later.

  • Page 16: Cleanup

    Cleanup Site Considerations Workbench Load The unpainted surfaces of your machine are coated with a heavy-duty rust preventative that Refer to the Machine Data Sheet for the weight prevents corrosion during shipment and storage. and footprint specifications of your machine. This rust preventative works extremely well, but it Some workbenches may require additional rein- will take a little time to clean.

  • Page 17: Assembly

    Assembly Hex Nut Set Screw The machine must be fully assembled before it can be operated. Before beginning the assembly process, refer to Needed for Setup and gather all listed items. To ensure the assembly process goes smoothly, first clean any parts that are cov- ered or coated in heavy-duty rust preventative (if applicable).
  • Page 18 Attach lower elbow-joint to power feeder Position upper elbow-joint so internal assembly by threading lower elbow-joint lever threads contact those inside lower elbow- all the way into threads of axial hub of power joint, then fully tighten upper elbow-joint lock feeder (see Figure 11).

  • Page 19: Base Mounting

    Base Mounting Also, aim the front of the power feeder slightly towards the machine fence (see Figure 15) with approximately 1° to 1.5° toe-in toward the machine fence, so the rubber rollers lightly push Position the power feeder on the table top to the workpiece against the fence during cutting determine where to drill the base mounting holes operations.
  • Page 20 Through-Bolt Mounting Direct Mounting We recommend mounting the power feeder to Use the included mounting template to drill and the machine table with through bolts, nuts, and tap the table so the power feeder base can be washers (see Figure 16). This option provides directly mounted to the table surface (see Figure 17).

  • Page 21: Test Run

    Test Run To test run machine: Clear all setup tools away from machine. Once assembly is complete, test run the machine Make sure power feeder gearbox oil level to ensure it is properly connected to power and is full. Refer to Lubrication on Page 28 for safety components are functioning correctly.
  • Page 22 Press ON/OFF button, press SET button (see Press motor start/speed dial Figure 19), and use motor start/speed dial to (see Figure 20). Rollers should stop rotating. select 10 FPM on readout. Number will flash for 10 seconds, then glow steadily. Press reverse feed direction button shown in Figure 20, then press and hold Press forward feed direction button...

  • Page 23: Section 4: Operations

    Read books/magazines or get formal training before beginning any proj- ects. Regardless of the content in this sec- tion, Grizzly Industrial will not be held liable for accidents caused by lack of training. -21- Model G0826 (Mfd. Since 01/17)

  • Page 24: Basic Use & Care

    Basic Use & Care 1° to 1.5° Angle Table Saw Fence You MUST assemble all guards, fences, and Optional hold-downs before starting your machine or Featherboard power feeder. Failure to heed this warning could result in amputation or death! Feed Power feeders reduce kickback hazards and improve cutting results by feeding in a consistent and stable manner.

  • Page 25: Changing Speeds

    Changing Speeds Vertical/Incline Feeding The Model G0826 can be positioned to feed To reduce risk of shock or workpieces so the rollers are angled relative to accidental startup, always the machine fence at 45°, 90°, or another angle disconnect machine from in between.
  • Page 26 While holding onto rotation handle with one (Side View) hand, disengage swivel lock pin, rotate power Power feeder clockwise (flip it upside down) so it is Workpiece Feeder oriented as shown in Figure 25, then move it back over table and up against fence. Swivel Lock Pin Jointer...

  • Page 27: Section 5: Accessories

    To reduce this risk, only install accessories recommended for this machine by Grizzly. NOTICE Refer to our website or latest catalog for additional recommended accessories.
  • Page 28 Gun Treatment 12 Oz. Spray ® H3789—G96 Gun Treatment 4.5 Oz. Spray ® Figure 35. T28095 Replacement Roller. Figure 33. Recommended products for protect- ing unpainted cast iron/steel part on machinery. www.grizzly.com 1-800-523-4777 order online at or call -26- Model G0826 (Mfd. Since 01/17)

  • Page 29: Section 6: Maintenance

    SECTION 6: MAINTENANCE Cleaning & Protecting To reduce risk of shock or accidental startup, always disconnect machine from power before adjustments, Cleaning the Model G0826 is relatively easy. maintenance, or service. Frequently blow off sawdust with compressed air. This is especially important for internal working parts and the motor.
  • Page 30 Gearbox Items Needed NLGI#2 Grease or Equivalent ... As Needed Lube Type .........80-90W Gear Oil ISO 32 Oil or Equivalent ....As Needed Amount ...........4.05 Oz. Clean Shop Rags ......As Needed Lubrication Frequency: Mineral Spirits ........As Needed • 200 Hrs./First Month of Operation Brushes ..........
  • Page 31 Chain & Sprockets Lock Levers Lube Type ..... T26419 or NLGI#2 Equivalent Lube Type ......ISO 32 or Equivalent Amount ..........Thin Coat Amount ..........Thin Coat Lubrication Frequency ...8 Hrs. of Operation Lubrication Frequency ...8 Hrs. of Operation To prevent rust and binding, brush the sprockets To prevent rust and binding, periodically clean and chains (see Figure 39) with a light film of and oil all lock-lever and leadscrew threads...

  • Page 32: Section 7: Service

    SECTION 7: SERVICE Review the troubleshooting and procedures in this section if a problem develops with your machine. If you need replacement parts or additional help with a procedure, call our Technical Support. Note: Please gather the serial number and manufacture date of your machine before calling. Troubleshooting Motor &...

  • Page 33: Roller Replacement

    (see Figure 43). To reduce risk of shock or accidental startup, always disconnect machine from power before adjustments, maintenance, or service. Worn or damaged rollers are easily replaceable. Contact Grizzly Customer Service at (570) 546-9663 order replacement roller (Part #P0826081). Hex Nut Tool Needed Socket 24mm .............

  • Page 34: Section 8: Wiring

    Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -32- Model G0826 (Mfd. Since 01/17)

  • Page 35: Wiring Diagram

    Wiring Diagram 220V BLDC Motor Digital Readout Circuit Board (viewed from behind) SUT-19429 94-V0 J011235 RS485 ON/OFF Button L2 L1 L2 L1 6-15 Plug Ground Part: PLABEL-62 Part: PLABEL-62 Description: DISC Description: DISCONNECT 110V 2W X 3.3H Ground Circuit Board BT-220-V2 Part: PLABEL-6 Description: DIS...

  • Page 36: Section 9: Parts

    SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. 69-1 69-2 69-3 69-4 69-5...
  • Page 37 Power Feeder Assembly Parts REF PART # DESCRIPTION REF PART # DESCRIPTION P0826001 SPROCKET CASE P0826052 TAP SCREW M3 X 8 P0826002 SPROCKET SHAFT P0826053 DRO COVER P0826003 LOCK WASHER 12MM P0826054 TAP SCREW M4 X 12 P0826004 HEX BOLT M12-1.75 X 75 P0826055 DRO COVER PLATE P0826005...

  • Page 38: Column & Stand

    Column & Stand 108A 101A -36- Model G0826 (Mfd. Since 01/17)
  • Page 39 Column & Stand Parts REF PART # DESCRIPTION REF PART # DESCRIPTION 101A P0826101A BASE ASSEMBLY P0826124 ELEVATION HANDLE ARM 130L P0826101 VERTICAL COLUMN BASE P0826125 ROLL PIN 6 X 36 P0826102 HEX BOLT M12-1.75 X 75 P0826126 ELEVATION HANDLE 10, 25 X 69 P0826103 LOCK WASHER 12MM P0826127...

  • Page 40: Labels & Cosmetics

    Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. -38-...
  • Page 41 Would you recommend Grizzly Industrial to a friend? _____ Yes _____No Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. _____ Yes _____No 10.
  • Page 42 FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE...

  • Page 43: Warranty & Returns

    WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

This manual is also suitable for:

Easy feederG0826

Table of Contents