3.
Basic Functions
Operation Management
■
Remote Power Operation (Wake On LAN)
Wake On LAN is a function that turns on the ETERNUS DX via a network.
When "magic packet" data is sent from an administration terminal, the ETERNUS DX detects the packet and the
power is turned on.
To perform Wake On LAN, utility software for Wake On LAN is required and settings for Wake On LAN must be
performed.
The MAC address for the ETERNUS DX can be checked on ETERNUS CLI.
Figure 23 Power Supply Control Using Wake On LAN
Administration terminal
Wake On LAN utility
Packet transmission
LAN
ETERNUS DX
48
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview
Copyright 2019 FUJITSU LIMITED
P3AM-7702-29ENZ0