Sony DVCAM DSR-PDX10 Service Manual page 468

Changing the default settings with the menu
Icon/item
VCR SET
CH SELECT
AUDIO MIX
A/VtDV OUT
NTSC PB
LCD/VF SET
LCD COLOUR
VF B.L.
GUIDEFRAME
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing
the picture on the TV.
Notes on VF B.L.
• When you select BRIGHT, battery life is reduced by about 10 percent during
recording.
• When you use power supplies other than the battery pack, BRIGHT is automatically
selected.
Even if you adjust LCD COLOUR and/or VF B.L.
The recorded picture will not be affected.
216
Mode Meaning
z CH1, CH2 To play back the CHs 1/2 audios from each
channel. However, if you play back the audios
via the camcorder's speaker, the audios are
mixed.
CH1 To play back the CH1 audio from both channels
1/2
CH2 To play back the CH2 audio from both channels
1/2
—— To adjust the balance between the channels 1/2
(CH1/2) and channel 3/4 (CH3/4) (p. 120)
z OFF To output digital images and sound in analog
format using your camcorder
ON To output analog images and sound in digital
format using your camcorder (p. 211)
z ON PAL TV To play back a tape recorded in the NTSC colour
system on a PAL system TV
NTSC 4.43 To play back a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
—— To adjust the colour on the LCD screen, turn the
SEL/PUSH EXEC dial
To get low-
intensity
z BRT NORMAL
To set the brightness on the viewfinder screen to
normal
BRIGHT
To brighten the viewfinder screen
z OFF Does not display the guide frame.
ON Displays the guide frame (p. 63).
CH1 CH3
2 4
To get high-
intensity
POWER
switch
VCR
VCR
VCR
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY