Panasonic KX-TDE100 Getting Started page 43

4.
Not using a DHCP server when the IP-PT is on the remote office LAN
All the IP addressing information must be assigned manually.
Follow the procedure below to assign the IP addressing information.
KX-NT300 series (except KX-NT321)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address*
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address (if required)
Select "Default Gateway".
To enter the IP address of the IPCMPR card (PBX IP Address)
Return to the
Menu screen.
To end programming
STORE
Press "STORE".
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and
255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
4.3 Programming the Virtual Extension Card and IP Telephones
Press "SETUP" when it is displayed.
ENTER Select "Disable"
for DHCP setting.
1
ENTER
Subnet Mask Address*
ENTER
Default Gateway Address*
ENTER
Select "PBX". ENTER
The IP-PT will reboot
and establish connection
to the network.
SETUP
Select "IP Address".
2
PBX IP Address*
Getting Started for Virtual IP Cards
ENTER
ENTER
3
ENTER
1
ENTER
43