Table of Contents
Advertisement
Turning Power On or Off
. To turn on power
Hold down the [
] button until the operation lamp lights.
The operation lamp will light in a color that indicates the current battery level, and
then change to flashing green.
Turning on the camera will cause it to connect with the remote controller, and the
operation lamp will slowly flash green.
. To turn off power
Hold down the [
] button until the operation lamp goes off.
NOTE
• Turning off the camera will cause the remote controller to turn off automatically.
• Turning off the remote controller does not turn off the camera.
Checking the Remote Controller Battery Level
The current remote controller battery level can be determined by observing the
operation lamp color immediately after you turn on the remote controller. If the
operation lamp lights red, replace the battery.
Green
High
Amber
8
Red
Low
Quick Start Basics
Advertisement
Table of Contents
