Using The Battery Pack With The Projector - Toshiba TDP-FF1A Owner's Manual

Using the battery pack with the projector

The following procedures are for the installation of the battery pack with the projector.
Installing the battery
 Turn off the power switch and disconnect the AC adaptor.

Open the battery connector cover.
 Plug in the battery pack.
 Press down the battery pack firmly until it clicks into place.
 Switch the power button to turn on the projector.
Remove the battery
 Turn off the power switch and disconnect the AC adaptor.
 Move the button to "unlock" and keep it.
 Lift the battery pack.
 Remove the battery pack.
 Close the battery connector cover.
1
Charge the battery
The battery pack can be charged with the projector when the AC adaptor is connected. It
can be also charged when the projector is turned on. It takes 3 to 4 hours to charge the
battery completely.
2
3
20